28KF-84H 32KF-84H COLOUR TELEVISION OPERATION MANUAL Please read this operation manual carefully before using the colour television.
TERMS OF GUARANTEE Subject to the conditions listed below Sharp Electronics (U.K.) Ltd. (Hereinafter called «the Company») guarantee to provide for the repair of, or at its option replace the Sharp Equipment, or any component thereof, (other than Batteries), which is faulty or below standard, as a result of inferior workmanship or materials. The conditions of the Guarantee are: 1.
Safety Precautions This equipment complies with the requirements of Directives 89/336/EEC, 92/31/EEC and 73/23/EEC as amended by 93/68/EEC. Never remove the back of the cabinet, as there is high voltage in the TV set. Please call for service. To prevent fire or electrical shock, do not use the TV set in an excessively damp place. Unplug the power cord from the wall outlet immediately if the TV set begins to make unusual noises or give off smoke or an odd smell, then call your dealer for service.
Dear SHARP Customer Congratulations! You are now the proud owner of a SHARP Colour Television Receiver. To ensure proper operation, please read this manual carefully. After reading, keep this manual in a safe place for future reference. Contents Terms of guarantee ......................................................... 1 Safety precaution ............................................................ 2 Contents ......................................................................... 3 Accessories ........
Remote control buttons 1. 19. 2. 20. 3. 4. 5. 6. TV 1. Stand-by ON/OFF switch (TV) Video 2. Power ON / OFF switch (VCR) TV 3. Digit buttons 0 ~ 9 4. Flashback button Teletext 5. Green button 6. Red button TV 7. Volume Down/Cursor control Left 8. Menu button Teletext 9. 10. 11. 12. 13. 14. Reveal button List selector Store button Cancel button Top/ Bottom/Full button Reset button Video 15. 16. 17. 18. Rewind/picture search/reverse Play button Pause / Still button Stop button TV 19.
Controls and Terminals FRONT TV 1. Main Power On/Off Switch 2. Power Indicator 3. Remote Control Sensor 4. Door 1 2 3 4 5 6 7 8 9 10 11 12 13 HOW TO OPEN THE DOOR Put the finger in the lower part of the door and press upward. Behind the door 5. Volume Button (DOWN) 6. Volume Button (UP) 7. Program Selector (NEXT) 8. Program Selector (PREVIOUS) 9. S-Video input terminal 10. Video Input Terminal (PAL/SECAM/NTSC) 11. Audio Input Terminal (left) 12. Audio Input Terminal (right) 13.
Typical Connections Aerial connection - TV set only BACK OF TV Aerial (Not supplied) Aerial IN Aerial Lead (Not supplied) Aerial Connections - TV and VCR BACK OF TV Aerial (Not supplied) Aerial IN AV/TERMINAL (AV-1) Aerial Lead (Not supplied) Scart Lead (Not supplied) RF OUT BACK OF VCR Aerial Lead (Not supplied) Audio/Video Note: Aerial IN For further details, please refer to operation manual of your VCR.
Typical Connections (Continued) Connections - TV, DECODER and VCR (Videorecorder) DECODER Scart Lead (Not supplied) BACK OF TV Aerial (Not supplied) Euro SCART (RGB) AV/TERMINAL (AV1) Aerial IN Aerial Lead (Not supplied) Scart lead (Not supplied) RF OUT BLACK OF VCR Audio/Video Note: Aerial IN Aerial Lead (Not supplied) For further details, please refer to operation manuals of your DECODER and VCR.
Typiccal Connections (Continued) Connections - TV, DVD Player and Digital Set Top Box BACK OF TV DVD PLAYER Scart Lead (Not supplied) Satellite dish (Not supplied) Aerial (Not supplied) AV/TERMINAL (AV 1) Euro SCART (RGB) Aerial IN Aerial Lead (Not supplied) Scart Lead (Not supplied) Aerial Lead (Not supplied) DIGITAL SET TOP BOX RF OUT Note: TV SCART Dish Lead (Not supplied) AERIAL IN DISH IN For further details, please refer to operation manuals of your DVD Player and Digital Set Top Box.
Typical Connections (Continued) Connections - TV, VCR and Digital Set Top Box Scart Lead (Not supplied) Aerial (Not supplied) BACK OF TV Satellite dish (Not supplied) AV/TERMINAL (AV1) Euro SCART (RGB) Aerial IN Aerial Lead (Not supplied) Scart Lead (Not supplied) BACK OF VCR RF OUT Aerial IN Audio / Vídeo Aerial Lead (Not supplied) Scart Lead (Not supplied) Aerial Lead (Not supplied) DIGITAL SET TOP BOX RF OUT Note: TV SCART AERIAL IN Dish Lead (Not supplied) DISH IN For further detai
Typical Connections (Continued) Front connections -TV and Video cameraFRONT TV (Behind the door) S-Video lead (Hi-8) (Not supplied) Audio/Video lead (Not supplied) S-Video Input Terminal (Hi-8) Video Input Terminal Audio Input Terminal (left) Audio Input Terminal (right) Note: WIEW CAM For further details, please refer to operation manual of your Video Camera.
Auto Installation ■ Auto Installation System (AIS) Your television set is provided with an Automatic Installation System which makes Installation easier. This new system is activated when you turn on the TV for the first time. Note: You may not have to follow this procedure if it has already been done for you at the establishment where you purchased your TV. If this is the case, go on to the section entitled -Switching ON(page 13). Power Indicator Main power button «AUTO INSTALLATION» Procedure: 1.
Stored programmes When the TV has finished the automatic search, the «Stored programmes» menu will appear on screen with a list of the channels, which have been memorised with the available options: a) Select programme to be edited 씮 / . b) «Edit this program» 씮 RED button . c) «Go to sorting mode» 씮 GREEN button . d) «Delete this program» 씮 YELLOW button . e) «Exit this menu» 씮 BLUE button . With these options, you will be able to organise the real channels (CH **) memorised in the TV programmes (Pr 01 ...
Switching on Power supply on/off buton This TV memorizes the Mode last used when it was switched off. When the main power button (® ) is pressed to turn on the set, the power indicator will light and the set will resume in either the Stand-by mode or Programme mode, depending upon its condition when it was switched off.
TV Operation Channel Selection Channel selector CH ù/CH Ù buttons Select the programme channel number you want to see, using the channel selector buttons ( CH / CH ). Pr 01 Pr 02 Pr 03 Pr 04 Pr 05 Pr 06 Pr 07 Pr 08 Pr 09 Pr 10 As you press these buttons a list of channels appears. Press the Note: CH / CH again to select another channel. The channels that are in SKIP mode cannot be seen with these buttons. Use numerical buttons to display these channels.
Menu Structures This TV set has: a MAIN MENU with four basic menus, which permit access to the different functions of the TV. These menus are as indicated below.
Picture Adjustments Picture quality (CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS, NORMALISE, TINT CONTROL, ECO MODE, NOISE REDUCTOR, BLACK STRETCHER, ROTATION and SVM) are adjustable in this menu. 1. Press the MENU button MAIN Menu to see the MAIN Menu. PICTURE ADJUSTMENTS MAIN Menu 2. Press the MENU button to see the PICTURE Menu. AUDIO ADJUSTMENTS OTHER FUNCTIONS INSTALL AND TUNE Picture Menu PICTURE Menu 3.
ECO MODE 8. ECO MODE Select «ECO MODE» and press the Cursor LEFT/RIGHT buttons / to reduce contrast in areas of the picture those are excessively white (ON or OFF). TINT CONTROL ECO MODE OFF NOISE REDUCTOR BLACK STRETCHER ROTATION ➜ NOISE REDUCTOR 9. NOISE REDUCTOR Select «NOISE REDUCTOR» and press the Cursor LEFT/RIGHT buttons / to reduce the noise when receiving a weak signal and improve the picture quality (OFF, AUTO, MEDIUM or HIGH).
100 Hz Fast Menu With this menu you can enter to the following functions: STILL Mode (Frozen picture), SCOPE Mode (Enlarge picture) and PICTURE MODE (Settings Audio and Video). 1. Press the 100 Hz FAST MENU button l to see the 100 Hz Fast Menu. 100 Hz Fast Menu 100 Hz Fast Menu 2. Press the corresponding coloured button: Press the RED button «STILL» to freeze the picture. Press the GREEN button «SCOPE» to enlarge picture. Press the YELLOW button «PICTURE MODE» to change the audio and video Settings.
Wide Mode Menu With this menu you can select the width of the picture: AUTO, PANORAMA, FULL, NORMAL, ZOOM 14:9 or CINEMA, by pressing the WIDE MODE button . Each time you press the WIDE MODE button picture changes as indicated: WIDE MODE button , the width of the AUTO * ➔ PANORAM A ➔ FULL ➔ NORM AL ➔ ZOOM 14:9 ➔ CINEM A AUTO. When you Select: PANORAMA, ZOOM 14:9 or CINEMA, 4 options appear on the screen: EXIT V-SCROLL: Press the RED button SCROLL menu.
Wide Mode (Special detail information) Special detail information about PANORAMA, FULL, NORMAL, ZOOM 14:9 and CINEMA (16:9). 4:3 PANORAMA The Panorama Mode adapts the broadcast picture to 16:9 format without changing the centre of view. This is especially useful for programmes like the News when the speaker in the centre of the picture needs to be seen clearly. FULL With Full Mode you adapt the picture 16:9 format while also stretching the centre of view.
Audio Adjustments Loudspeakers Sound Volume / Use the / buttons to increase/decrease the volume level. The volume indicator will appear on the screen. Note: To adjust the headphones volume, go on to the section entitled -SOUND menu- (page 22). Sound mute button Press the button to mute the sound. «MUTE» appears on the screen. Press the button again to turn the sound back on. MUTE Sound Mode Selector button Press the button to change the sound in the speakers.
Sound Setting Mode MAIN Menu Sound qualities are adjustable in this menu. 1. Press the MENU button to see the MAIN Menu. 2. Press the Cursor DOWN button 3. Press the MENU button 4. Press the RED button CH PICTURE ADJUSTMENTS to select «AUDIO ADJUSTMENTS». SOUND Menu to select «LOUDSPEAKERS» or press the GREEN button VOLUME LOUDSPEAKERS VOLUME EQUALIZER HEADPHONES BASS LOUDNESS TREBLE BALANCE BALANCE NORMALISE NORMALISE ➜ ➜ LOUDSPEAKERS to select «HEADPHONES».
«NORMALISE» Select «NORMALISE» and press the MENU button audio levels to default factory settings. «NORMALISE» to normalise VOLUME 7. Press the Cursor DOWN button CH to see more options: «LOUDSPEAKERS» (Mode), «HEADPHONES» (Mode), «EFFECTS» and «SOUND IDENTIFICATION». LOUDSPEAKERS EQUALIZER LOUDNESS BALANCE NORMALISE ➜ SOUND MODE 8. Press the Cursor UP / DOWN buttons CH / CH to select: «LOUDSPEAKERS» or «HEADPHONES». 9.
Features setting mode In this mode you can set the «ON-TIMER» an «OFF-TIMER», set the CHILD LOCK, view the all functions implemented in your TV set demonstration and set the POSTCODE. 1. Press the MENU button to see the MAIN Menu. 2. Press the Cursor DOWN button F to select «OTHER FUNCTIONS». 3. Press the MENU button to see the «OTHER FUNCTIONS» Menu. «OTHER FUNCTIONS» Menu 4.
Child Lock (Channel Block) You can lock a TV channel to prevent unsupervised TV viewing by following these procedures; the protection can apply to the television itself «LOCK ALL» or to specific programmes «LOCK PROGRAMME». With the CHILD LOCK function, you can also programme a time period during which the TV will be protected. (Your children cannot select the channel, which you locked). 1. Press the MENU button to see the MAIN Menu. MAIN Menu MAIN Menu 2.
«LOCK PROGRAMME» menu Select this option to protect the access to separate programmes. «LOCK PROGRAMME» menu 1. Press the MENU button to clear the on-screen display. LOCK ALL 2. Select the programme channel number you want to protect using NONE LOCK PROG. the 0 ~ 9 digit buttons or the channel selector E /F buttons. ALWAYS LOCKED START: **:** 3. Repeat steps 1. to 5. (Page 25) to see the CHILD LOCK Menu. STOP: **:** CLEAR LOCK 4. Press the Cursor DOWN button F to select «LOCK PROGRAMME» (blue background).
Postcode Security This option allows you to set a code (Postcode), which will be displayed at TV switch on time. There is a Password (PSW) to change the code. MAIN Menu SET PASSWORD AND POSTCODE 1. Press the MENU button OTHER FUNCTIONS to see the MAIN Menu. MAIN Menu 2. Press the Cursor DOWN button F to select «OTHER FUNCTIONS». 3. Press the MENU button to see the «OTHER FUNCTIONS» Menu. «OTHER FUNCTIONS» Menu 4. Press the Cursor UP button E to see the POSTCODE Menu.
CHANGE PASSWORD AND/OR POSTCODE POSTCODE Menu ENTER PSW (Password) If necessary, repeat steps 1. to 4. (page 27) to see the POSTCODE Menu. POSTCODE Menu / ENTER PSW (Password) It is indispensable to enter the current Password in order to change the Password and/or the Postcode. 5. Enter the current Password (4-digits) using the number buttons 0 to 9 to see the CHANGE PASSWORD Menu.
TV Channel Setting (Advanced) To repeat the AUTO INSTALLATION MAIN Menu In this mode you can to do again the AUTO INSTALLATION (e.g.; after moving house). This function frees you of troublesome channel presetting procedures. Simply follow the instructions below to automatically store all onair and cable real channels into the programme channel memories. OTHER FUNCTIONS INSTALL AND TUNE TUNE Menu 1. Press the MENU button to see the MAIN Menu. MODE MAIN Menu 2. Press the Cursor DOWN button F TUNE».
Manual Channel Preset (Preset using real channel numbers) 1. Select the programme channel number you want to preset with the 0 ~ 9 digit buttons. 2. Press the MENU button 3. 4. to see the MAIN Menu. MAIN Menu PICTURE ADJUSTMENTS MAIN Menu Press the Cursor DOWN button F to select «INSTALL AND TUNE». Press the MENU button to see the TUNE Menu. AUDIO ADJUSTMENTS OTHER FUNCTIONS INSTALL AND TUNE 5. 6.
Manual Channel Preset (Preset using frequency tuning) 1. Select the programme channel number you want to preset with the 0 ~ 9 digit buttons. 2. Press the MENU button 3. MAIN Menu Press the Cursor DOWN button F TUNE». 4. 5. 6. Press the MENU button to see the MAIN Menu. MAIN Menu PICTURE ADJUSTMENTS AUDIO ADJUSTMENTS to select «INSTALL AND OTHER FUNCTIONS to see the TUNE Menu.
After preset has been performed MAIN Menu The following features are available for preset channels: Fine-tuning When a preset programme channel is not exactly tuned, you can fine-tune the channel in this mode. 1. Select the programme channel number you want to tune using the 0 ~ 9 digit buttons. 2. Press the MENU button to see the MAIN Menu. MAIN Menu 3. Press the Cursor DOWN button F TUNE». 4.
Edit (Stored programmes) This features allows you to delete, sort or input name for each one of the programmes with A ~ Z, 0 ~ 9 and hyphen. MAIN Menu 1. to see the MAIN Menu. Press the MENU button MAIN Menu 2. 3. Press the Cursor UP button E TUNE». PICTURE ADJUSTMENTS to select «INSTALL AND AUDIO ADJUSTMENTS to see the TUNE Menu. Press the MENU button OTHER FUNCTIONS INSTALL AND TUNE 4. 5. TUNE Menu TUNE Menu Press the Cursor UP button E to select «EDIT» (blue box).
Other Features TV/Video selector button With this button you can select either source of input for the TV. 1. When the TV/VIDEO button TV/Video Menu is first pressed, the TV/Video EURO-SCART menu appears and TV mode changes to VIDEO mode. The screen is displayed in the last VIDEO mode. 2. Press the corresponding COLOUR button to select one of the input sources, as indicated in the diagram. If you press any COLOUR button during VIDEO mode, the TV/Video menu will appears again.
VCR mode SHARP VCR can be operated using the TV remote control. Channel selector buttons (VCR) CH These buttons are used for changing channels and setting the timer. Play button Press this button to start playback. Record button Press this button to start recording. If the videocassette is protected against recording, it will be ejected. Stop button Press this button to stop playback or recording. Operate button VCR Press this button to turn your VCR on.
TELETEXT Mode What is Teletext? Teletext is an information service, organized like a magazine, which is provided by some television stations in addition to regular television broadcasting. Your television receives special Teletext signals broadcast by a TV station, processes the information and displays it graphically on the screen. News, weather and sports information, stock exchange prices, program previews and closed captioning for the deaf are among the many services available through Teletext.
Other TEXT features TEXT/MIX/PICTURE button a/ b/ Q Every time this button is pressed, the Teletext is displayed in different modes, following the sequence described: In TV mode: Press the TEXT/MIX/PICTURE button a/ b/ Q to enter the teletext mode. In teletext mode: Press the TEXT/MIX/PICTURE button a/ b/ Q to superimpose a teletext broadcast onto the current TV programme screen (mixed mode). In mixed mode: Press the button again to return to the normal screen(TV mode).
Advanced TEXT operation - LIST mode Teletext Page memory List a) How to Operate Page Memory Your TV has 40 teletext page number memories for fast recall of teletext information. In programme positions 1 through 9, four teletext page numbers can be stored in each position; a total of 36 pages. In programme positions 10 through 99, only one programme with 4 page numbers can be stored.
21-pin Euro-SCART and 21-pin Audio/Video REAR TV 21-pin In/Out 1. 21-pin Audio/Video (AV-1) With PAL/SECAM/NTSC/S-Video Input 2. 21-pin Euro SCART (RGB) With PAL/SECAM/NTSC Video Input RF Input 1 2 3 3. Aerial terminal 20 21 18 19 16 17 14 15 12 13 10 11 8 9 6 7 4 5 2 3 21 1 21-pin Euro-SCART (RGB) 1. 2. 3. 4. 5. 6. 7. Audio right output Audio right input Audio left output Common earth for audio Earth for blue Audio left input Blue input 8. 9. 10. 11. 12. 13. 14.
Troubleshooting If the fault cannot be corrected by using this guide, remove the mains plug from the wall socket and contact the dealer or supplier from whom it was purchased. Where this is not possible, please visit our web-site at www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 [or (01) 676 0648 if telephoning form Ireland] during office hours.
General Specifications for Television Receiver Models: 28KF-84H and 32KF-84H 1. Receiving Broadcast Standard CCIR TV Standard system PAL-I 2. Receiving Channel VHF: IRA - IRJ (CH01-CH09) UHF: I21 - I69 (CH21-CH69) CATV: S01 – S68 CC (Hyper band) 3. Receiving System Sound: FM MONO and DIGITAL STEREO NICAM Colour System: PAL (SECAM and NTSC playback through the AV Inputs) Field Frequency: 50/60 Hz Capability 4. 5.
Index 100 Hz Fast Menu ..................................................... 18 21-pin Audio/Video ................................................... 39 21-pin Euro-SCART (RGB) ....................................... 39 M Main power button .................................................... 13 Manual Channel Preset ....................................... 30, 31 Menu Structures ....................................................... 15 Mono .................................................................
✂ PASSWORD POSTCODE SECURITY TV SHARP 28/32KF-84H SHARP ELECTRÓNICA ESPAÑA, S. A. SHARP ELECTRONICS (U.K.) LTD.
