User Manual

[ Behind the door ]
Using headphone
Insert headphone plug into headphone jack to listen to audio with
headphone.
• The audio from the speakers is turned off.
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before
the power is turned on.
E4 ACCESSORIESE2 BEFORE OPERATING TELEVISION
Y
Standard DIN45325
plug (IEC169-2)
75-ohm
coaxial cable
(round cable)
(not supplied)
300-ohm
twin-lead
flat feeder
(not supplied)
75-ohm
impedance
converter
(not supplied)
Antenna in
TV
Y
Antenna in
TV
VCR
To antenna
in terminal
To RF out
terminal
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
Connecting to an antenna
Connecting to an antenna via a VCR
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
E3 DVD PLAYBACK
TV
Y
DVD input terminals
Y
To colour-difference
(component video)
out terminals
To audio out
(L/R) terminals
DVD player
Green : To Y
Blue : To PB (CB)
Red : To PR (CR)
Red : To AUDIO IN (R)
White : To AUDIO IN (L)
Connecting the video terminals
TV/VIDEO
0
4
7
2
8
3
6
9
CH
CH
1
5
MENU
SURROUND
LANGUAGE
NORMAL
TV/VIDEO
COMPONENT
Connecting to a DVD player
The DVD input terminals (COMPONENT-IN) on the rear of the TV can be used to input high-
quality images from a DVD player.
DVD input terminals DVD player
COMPONENT-IN
VIDEO
Y Y or Y/Y
PB(CB)PB(CB) or B-Y/Pb
PR(CR)PR(CR) or R-Y/Pr
Watching DVD Playback
! Press
TV/VIDEO
to select “COMPONENT”, DVD
input screen.
@ Turn on the DVD player and begin playback.
• When connecting the TV to a DVD player via the
COMPONENT-IN terminals, the video and audio from the
DVD player cannot be output through the Audio/Video
out terminals on the TV.
The following accessories are included with this television.
Remote Control Size-AA batteries
Operation manual
E5 PART NAMES
Door
Bottom
!$%^@# & * (
POWER
!
POWER switch
Turns on and off the main power.
/
%
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
CH
CH
/
^
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
@
Power indicator
Power can be turned on by the remote control when
the indicator is dimly lit.
#
Infrared sensor window
Receives the infrared wave from the remote control.
&
Video input terminal (AV-2)
Connects to a camcorder, video game, etc.
*
Audio input terminals (AV-2)
Connects to a camcorder, video game, etc.
(
Headphone jack
Use to listen to the audio with headphone.
MENU/PRESET
$
MENU/PRESET button
Tunes the channels.
Used for MENU setup.
TV set
To open the door
Using the projection located under the
“PULL-OPEN” indication, pull and lift the
door open.
To close the door
Using the projection, lower the door until
closed.
Caution:
• When opening or closing the door, do not insert
your fingers into the gap between the door and
front panel. This may result in an injury.