Service manual

21HT-15C
21HT-16C
7
•
Service adjustment and data list
The table below shows the various service mode positions, range of values and default value. The columns are headed
as below.
Heading: Descriptions:
OSD This is what will appear on the screen at this position.
Function This is the description of the mode’s function.
Range This is the range of values that can be entered while in this mode.
Initial This is the initial value, i.e. just after changing the NVM. Shadowed values are those to be modified in
Default.
Default This is the recommended default value for this mode.
FIX/ADJ If this is ADJ, then it may be necessary to adjust this value away from the default.
No. OSD Function Range Initial Default FIX/ADJ
1 AGC AGC Take Over Point 0...63 14 34 ADJ
2 V-LIN Vertical Slope [VS] 0...63 32 33 ADJ
3 V-AMP Vertical Amplitude [VA] 0...63 32 18 ADJ
4 V-CENT Vertical Shift [VSH] 0...63 32 17 ADJ
5 H-CENT Horizontal shift [HS] 0...63 32 34 ADJ
6 H-CENT60 offset to H-CENT for60 Hz 0...31 data(-16..+15) 16 20 FIX
7 EW / / Horizontal Parallelogram [HP] 0...63 32 32 FIX
8 HB Horizontal Bow 0...63 32 32 FIX
9 S-COR S-Correction [SC] 0...63 0 22 FIX
10 DRI-RS White point Red Standard white temp. 0...63 32 42 ADJ
11 DRI-GS White point Green Standard white temp. 0...63 32 42 ADJ
12 DRI-BS White point Blue Standard white temp 0...63 32 42 ADJ
13 DRI-RW White point Red Warm white temp. 0...32 16 16 FIX
14 DRI-GW White point Green Warm white temp. 0...32 16 9 FIX
15 DRI-BW White point Blue Warm white temp. 0...32 16 9 FIX
16 DRI-RC White point Red Cold white temp. 0...32 16 9 FIX
17 DRI-GC White point Green Cold white temp. 0...32 16 9 FIX
18 DRI-BC White point Blue Cold white temp. 0...32 16 16 FIX
19 SUB-VOL Max Volume 0...63 60 60 FIX
20 SUB-CON Sub Contrast 0...63 63 63 FIX
21 SUB-COL Sub Colour 0...63 32 25 FIX
22 SUB-BRI Sub Brightness 0...63 32 34 FIX
23 TINT Sub Tint 0...63 32 32 FIX
24 SUB-SHP Sub Sharpness 0...63 32 11 FIX
25 HTL-VOL Max Hotel Volume 0...63 30 30 FIX