Specifications

4.23 Fluorescent Lamp 4 Replacement Procedures
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-95
8. Install the bezel (E) on the lamp cover and hook the four latches on the lamp cover and
two latches on the P-chassis.
Figure 4-81 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (20)
Figure 4-82 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (21)
(E) Bezel
(1) Hitch
the
hook of
the
bezel
on the rib of the P-chassis.
<Side view>
(2) Lean
the
bezel on
the
lamp cover without
interference with the TCP.
Make sure of mating of
the
bezel and
the
the
P
-
chassis.
Make sure of mating
the
bezel and
the
latch of the P-chassis.
Make
sure of mating of
the
bezel
and the latch of the P-chassis.