Operator`s manual

SPECIFICATIONS
Form 169000 / 169040 23 Revision C
5.2 SELF-PROPELLED HEADERS
HEADER SIZE
14 FT 16 FT 18 FT
HEADER MODEL A30-S A30-D A40-D A30-S A30-D A40-D A30-D A40-D
FRAME and STRUCTURE
Width 16 ft-3 in. (4953 mm) 17 ft-9 in. (5410 mm) 19 ft-3 in. (5867 mm)
Weight [lb (kg)] n/a n/a
5680
(2579)
n/a n/a
5850
(2656)
n/a
6020
(2733)
Carrier
MacDon M Series Self-Propelled Windrowers
Lighting
Two Amber Transport Lights
Spare Knife Storage
Frame
Tube
Lean Bar
Frame
Tube
Lean Bar Lean Bar
Reversing Wrench/Guard
Straightening Tool
Stored Inside LH End Sheet
Manual Storage
Windrower Cab
CUTTERBAR
Effective Cutting Width
14 ft-9 in. (4496 mm) 16 ft-3 in. (4953 mm) 17 ft-9 in. (5410 mm)
Cutting Height
5.9 in. (150 mm) Below Ground to 35.4 in. (900 mm) Above Ground
Guard Angle Adjustment 7° - 17.5°
HEADER DRIVE
A30 Hydraulic From Windrower Pump to One Piston Motor
A40 Hydraulic From Windrower Pump to One Piston Motor and Two Gear Motors
SICKLE
Belt Driven Heavy Duty
(MD) Wobble Box
(Enclosed Oil Bath)
Belt Type
V Timing V Timing
Qty One Two One Two
Sickle Speed (Strokes Per Minute) 1540 1450 - 1950 1540 1450 - 1950
Stroke 3 in. (76 mm)
Sections Bolted Over-Serrated, 14 Serrations/Inch. (9 Serrations/Inch Optional)
Guards Forged And Double Heat-Treated
AUGER
Drive
Hydraulic Direct
Mounted Motor
--
15.9 in
3
(261 cc)
/rev
--
15.9 in
3
(261 cc)
/rev
--
15.9 in
3
(261 cc)
/rev
Mechanical 2 Belts To Chain --- 2 Belts To Chain ---
2 Belts
To Chain
---
Max Speed (rpm)
20T Sprocket 260 270
230- 320*
260 270
230-
320*
270
230-
320*
19T Sprocket 250 260 250 260 260
Size
Tube
10 in. (254 mm) O.D.
Flighting
20 in. (508 mm) O.D., 0.25 in. (6 mm) thick.
Type Undershot, Center Feed. Rubber Finger Feed
Stripper Bars 3 Per Side
Delivery Opening 95.7 in. (2430 mm)
* Max Speed on M100 Windrower