Operator`s manual

OPTIONS AND ATTACHMENTS
Form 169000 / 169040 186 Revision C
9 OPTIONS AND ATTACHMENTS
9.1 HYDRAULIC HEADER ANGLE KITS:
PULL-TYPE
This kit allows the header angle to be adjusted
hydraulically with a cylinder replacing the
standard mechanical link. A separate hydraulic
circuit is required or the existing APT steering
cylinder hydraulic circuit can be utilized,
depending on the tractor hydraulics. Installation
instructions are included with the kits.
9.2 ADDITIONAL SKID SHOES
In addition to the standard two outer skid shoes,
two inner skid shoes may be added for extra
control of cutting height and protection of cutting
components.
9.3 GAUGE ROLLER KIT
The gauge roller kit replaces the outer skid
shoes and consists of rollers in place of skid
shoes. They can be adjusted for varying cutting
height.
9.4 REPLACEMENT REEL BAT KITS:
A30-S, A30-D
Consists of one complete bat assembly for ease
of replacement.
9.5 STUB GUARD CONVERSION KIT
Stub guards, complete with top guides and
adjuster plates are designed to cut tough crops.
Installation and adjustment instructions are
included with the kit.
9.6 TALL CROP DIVIDER KIT
The tall crop dividers attach to the ends of the
header for clean crop dividing and reel entry in
tall crops. The kit includes left and right dividers,
lean bar extensions and attachment hardware.