Operator`s manual

MAINTENANCE AND SERVICING
Form 169000 / 169040 109 Revision C
A30-D Headers (Cont’d)
CROSS SHAFT BEARING (1 PLC)
NOTE
To prevent binding and/or
excessive wear caused by sickle
pressing on guards, do not over
grease. If more than 6 to 8 pumps
of the grease gun are required to
fill the cavity, replace the seal in
the sickle head.
AUGER SHAFT BEARING (1 PLC)
REEL SHAFT BEARING (1 PLC)
High Temperature Extreme Pressure
(EP2) Performance With 1% Max
Molybdenum Disulphide
(NLGI Grade 2) Lithium Base
A30-D HEADER LH SIDE
SICKLE HEAD BEARING (1 PLC)