Operator`s manual

MAINTENANCE AND SERVICING
Form 169000 / 169040 108 Revision C
II. A30-D Headers
REEL SHAFT BEARING (1 PLC)
A30-D HEADER RH SIDE
High Temperature Extreme Pressure
(EP2) Performance With 1% Max
Molybdenum Disulphide
(NLGI Grade 2) Lithium Base
SICKLE DRIVE BEARING (1 PLC)
AUGER SHAFT BEARING (1 PLC)
NOTE
To prevent binding and/or
excessive wear caused by sickle
pressing on guards, do not over
grease. If more than 6 to 8 pumps
of the grease gun are required to
fill the cavity, replace the seal in
thesicklehead.
SICKLE HEAD BEARING (1 PLC)