User`s manual

INSTALLATIONS
14 MB700 User’s Manual
S1: Panel Type Setting
The S1 Panel Type Setting switch is only used when your system supports
LCD panels. Please note, however, that the BIOS shipped with your
MB700 supports only CRT. You will need another BIOS to support your
LCD panel. If you have any question, please contact your SBC vendor.
SW DIP Switch
1 2 3 4
Panel Type
On On On On
1024 x 768 Dual Scan STN Color Panel
Off On On On
1280 x 1024 TFT Color Panel
On Off On On
640 x 480 Dual Scan STN Color Panel
Off Off On On
800 x 600 Dual Scan STN Color Panel
On On Off On
640 x 480 Sharp TFT Color Panel
Off On Off On
640 x 480 18-bit TFT Color Panel
On Off Off On
1024 x 768 TFT Color Panel
Off Off Off On
800 x 600 TFT Color Panel
On On On Off
800 x 600 TFT Color Panel (Large BIOS only)
Off On On Off
800 x 600 TFT Color Panel (Large BIOS only)
On Off On Off
800 x 600 TFT Color Panel (Large BIOS only)
Off Off On Off
800 x 600 TFT Color Panel (Large BIOS only)
On On Off Off
1024 x 768 TFT Color Panel (Large BIOS only)
Off On Off Off
1280 x 1024 Dual Scan STN Color Panel (Large
BIOS only)
On Off Off Off
1024 x 768 Dual Scan STN Color Panel (Large
BIOS only)
Off Off Off Off
1024 x 600 TFT Color Panel (Large BIOS only)