User Manual

E 7
Watching TV
1 Turn on power.
• When the power indicator is off, press
.
• When the power indicator is red, press
on the remote
control. The power indicator changes to green and a picture appears.
Power indicator
CH
CH
Watching a TV programme
Simple operations for watching a TV programme
TV Set
With
CH
/
CH
• Press
CH
and channels change as shown below.
1 / 2 / ... / 98 / 99 / AV1 / AV2 / 0 / 1 / 2 ...
• Press
CH
and channels change as shown below.
1 / 0 / AV2 / AV1 / 99 / 98 / ... / 2 / 1 / 0 ...
TV
TV/VIDEO
4
7
2
8
3
6
9
0
MENU
NORMALSURROUND
LANGUAGE MPX
CH
CH
1
5
CH
CH
1
5
VOLUME 10
3 Adjust volume using /
.
• The number of oval blocks “
” and
“
” indicates the volume level.
The volume bar disappears
approximately three seconds after
the volume has been adjusted.
2 Select channel.
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
5
.
If “5-” is indicated, press
to select one-digit input, and then
press
5
again.
• To select a two-digit channel, such as 15, press
to select
the two-digit input. Press
1
, and then press
5
.
--
1-
15
PAL
I
• When the power indicator is red, either
CH
/
CH
on the TV can be pressed to turn on the
power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the power indicator is red, the TV is in Standby mode and power is still supplied to the TV. If you
will not watch TV for a while, turn off the main power by pressing
on the TV set. Also, if you will
not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 and AV2 input channels cannot be selected using
CH
/
CH
on the remote control.
Use
TV/VIDEO
to select these channel.
• Channels that have been skipped cannot be selected. See
15
.
• The on-screen displays in this manual may differ from their actual appearance.