Specifications
5.3 Environment Setup
5.3.1 Environment setup dialog box
5 - 55
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
*1 For specifying a virtual drive, do not specify the same folder set as the other virtual drive or virtual drives for other
GT SoftGOT1000.
Doing so may cause malfunctions.
Item Description
Font
Font Control
Select a font language used for monitoring.
When selecting Japanese (Supporting Europe) or Chinese (Simplified) (Supporting Europe), Latin characters are
displayed in one-byte characters.
Japanese: Japanese characters are displayed.
Japanese (Supporting Europe): Japanese characters (supporting Europe) are displayed.
Chinese (Simplified): Chinese (Simplified) characters are displayed.
Chinese (Simplified) (Supporting Europe): Chinese (Simplified) characters (supporting Europe) are displayed.
16dot Standard
Font
Select the font type of 16dot standard font.
[Gothic], [Mincho]
TrueType
Numerical Font
Select a font type of the TrueType numerical font.
[Gothic], [7-Segment]
Use Japanese
optional font
This item is available only when selecting Chinese (Simplified) or Chinese (Simplified) (Supporting Europe)
for Font Control.
Do not check this item normally (when displaying in Chinese (Simplified) characters).
When checking this item, objects without Kanji region setting will be displayed in Japanese.
Authentication
Select an authentic method.
Select the same authentic method set in [System Environment] of GT Designer2.
KANA KANJI Conversion
Select a version of the Kana-kanji conversion function.
[Standard], [Enhanced]
Virtual A Drive*
1
Set a folder in the hard disc drive as the virtual A drive, which is used as the A drive environment of the GOT
main unit.
• Default
• Fixed:
Virtual B Drive*
1
Set a folder in the hard disc drive as the virtual B drive, which is used as the B drive environment of the GOT
main unit.
• Default
• Fixed:
File Output (Hard Copy
Function)
Select the output destination for the hard copy file.
• Default
• [Project Data Setting]
: Stores resource data in the virtual A drive.
Refer to the following for virtual A drive.
Section 3.3.1 Virtual drive
: Stores resource data in the folder specified by the user.
Select this item when storing resource data to a desired folder.
Clickingn the button displays the Browse For Folder dialog.
Select a folder to which resource data is stored.
Brouse
: Stores resource data in the virtual B drive.
Refer to the following for virtual B drive.
Section 3.3.1 Virtual drive
: Stores resource data in the folder specified by the user.
Select this item when storing resource data to a desired folder.
Clickingn the button displays the Browse For Folder dialog.
Select a folder to which resource data is stored.
Brouse
: Stores files in the virtual A drive (G1SgtHardcopy).
Refer to the following for G1SgtHardcopy.
Section 3.3.1 Resource data storage destination
: Stores files in the file output destination specified on the [Project Data Setting]
screen.