User Manual

‰ 16
ENGLISH
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
Colour and Sound System
<When set to AUTO>
The colour system is automatically detected and
selected. The selected system appears.
<When set to a specific system mode>
The mark indicates that the colour system is set
manually.
The sound system that was set manually appears.
• System indication during reception
@
!,#
Switching Systems:
Set the system to AUTO for normal TV reception. The AUTO mode automatically
detects the receiving signal system and changes the reception system of the TV set.
When the picture or sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
! Press the SYSTEM button 1 time.
@ Press the VOLUME UP (
) or
DOWN (
) button.
COLOUR SYSTEM mode
changes as shown on the right
each time you press the
VOLUME UP (
) or DOWN ( )
button.
# Press the SYSTEM button 2
times. The on-screen display
disappears.
• When you select the channel position
to AV by pressing the TV/VIDEO
button, COLOUR SYSTEM mode
changes in the following order:
! Press the SYSTEM button 2
times.
@ Press the VOLUME UP (
) or
DOWN (
) button.
SOUND SYSTEM mode changes
as shown on the right each time
you press the VOLUME UP (
)
or DOWN (
) button.
# Press the SYSTEM button again.
The on-screen display
disappears.
TV/VIDEO
TV
0
NORMAL
TIMERFUNCTION
SYSTEM
PICTURE
1
4
7
2
5
8
3
6
9
CH
CH
N358 N443
AUTO PAL SECAM
PAL
B/G
5
PAL
B/G
5