User Manual

ENGLISH

Flashing for 5 seconds

Timers (continued)

OFF Timer:

Automatically turns to Standby mode after the set length of time has passed.

■ Action of the Off Timer

5 minutes before the Off Timer

activates, the remaining time is

displayed on the screen for 3

seconds, and reappears at the start

of every remaining minute.

A flashing display of the remaining

time appears on the screen during

the last five seconds before the Off

Timer activates.

When the preset length of time (in

the above example, 2 hours and 30

minutes) has passed, the TV set

enters Standby mode.

• To cancel the Off Timer, press the NORMAL button during the Off Timer mode.

• The minute setting of the timer is in 10-minute units.

• The Off Timer is cancelled if the power is turned off with the STANDBY/ON (B) button on the remote control

or the POWER (X) switch on the TV set or if the power is otherwise cut off.

• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically

terminated and the TV set returns to normal mode.

■ Setting the Off Timer

! Press the TIMER button 2 times

and the OFF

display appears.

@ Press the VOLUME UP (

) or

DOWN (

) button to set the time.

(Maximum time that can be

preset is 12 hours and 50

minutes.) In this state, the Timer

starts to count down.

# When you have finished setting

the time, press the TIMER button

2 times. The on-screen display

disappears.

(The power turns off)

TV/VIDEO

NORMALSYSTEM

TIMERFUNCTION PICTURE

!,#