User Manual

13
ENGLISH
• TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically
terminated and the TV set returns to normal mode.
Picture Adjustment
• When the NORMAL button is
pressed while a PICTURE
selection is displayed on the
screen, only the selected mode
on the screen is reset to the
standard (factory setting)
position.
• When the NORMAL button is
pressed during NORMAL-MODE,
all PICTURE selections are reset
to the standard (factory setting)
positions.
! Press the PICTURE button to
enter Picture Adjustment mode.
@ Each time you press the PICTURE
button, the mode changes as
shown on the right.
# Adjust using the VOLUME UP
(
) or DOWN ( ) button.
Adjusting the Picture
TV/VIDEO
NORMALSYSTEM
TIMERFUNCTION PICTURE
TV
1
23
4
56
7
8
0
9
CH
CH
←
Press the
NORMAL button
(Example)
TINT is displayed only for NTSC
and is not displayed for PAL or
SECAM.
Selected Item
CONTRAST To decrease To increase
contrast contrast
COLOUR For less colour For more colour
intensity intensity
BRIGHTNESS For less For more
brightness brightness
TINT To move tint To move tint toward
toward purple green
SHARPNESS For less For more
sharpness sharpness
Press the (
) button
Press the (
) button
■ PICTURE menu screen
The following table lists the adjustment items shown in the PICTURE menu screen and how they change as
you press the VOLUME UP (
) or DOWN ( ) button.
(TV set)
#
!,@
#!,@