User Manual
- 10 -
To Store the Settings
Press
or button on STORE option to store Picture
menu settings.
The stored picture mode setting will be valid only in current
program. However, the other stored values in Picture Menu
will be valid for all the programmes.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
2.
Feature Menu
To enter the Feature menu directly, press the YELLOW
button, or
Press M button, now you are in Main menu. In the Main
menu, select FEATURE using
or button. Then en-
ter the Feature menu pressing
or button.
6281'
3,&785(
)($785(
,167$//
352*5$0
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the
first selected option. Use
or button to change the
Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00,
1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00.
It is displayed on the upper right of the screen. If sleep timer
is activated it is displayed with the TV status and erased with
it after 3 seconds.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
If there is left only one minute of the down counting of the
timer, it is displayed automatically on the upper left of the
screen, and stayed there until finishing. Then TV goes auto-
matically to stand-by.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote control.
The CHILD LOCK feature can be set by
or button to
either ON or OFF. When OFF is selected, there will be no
difference in the operation of your TV. When ON is selected,
the TV can only be controlled by the remote control handset.
In this case, the front panel buttons (except the Power On/
Off button) will not work.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
Selecting Menu Language
Menu language can be chosen by pressing
or button
on LANGUAGE item.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
To Store Settings
In Feature menu all settings are stored automatically.
Installation Menu
To enter the Installation menu directly, press the BLUE
button, or
Press M button, now you are in Main menu. In the Main
menu, select INSTALL. using
or button. Then en-
ter the Install menu pressing
or button.
6281'
3,&785(
)($785(
,167$//
352*5$0
Selecting Programme
To select programme number, you can use
or button,
Digit Buttons or The Double Digit button with digit buttons.
Selecting Band
BAND can be chosen as VHF1, VHF3 or UHF by
or
button.
Selecting Frequency
The frequency value is,
044 - 890 MHz for band VHF1 - VHF3 - UHF.
352*5$00(
%$1'
)5(48(1&<
67$1'$5'
6($5&+
),1(781,1*
6725(
9+)
%*
FREQUENCY can be changed by or button, by the
Digit buttons or by the Double Digit button with digit buttons.
The decimal value in frequency can not be changed by the
digit buttons, it can be changed only by the
or but-
ton. The value can be 00, 25, 50 and 75. Also changing
Fine Tuning changes the decimal part.
Selecting Standard
Using or button on STANDARD, you can change the
standard to B/G, D/K, L/L.
Selecting Search
To start the search process, press
button for forward
search or
button for backward search. SEARCH item
blinks during search process, since the process is stopped
or signal is found. During search process the semi-transpar-