Service manual

21
13VT-K100/150
13VT-CK10
12. JiGDRiVER-6 BM
11. JiGDRiVERH-4 AP
No. Jig ltem Part No. Code Configuration Remarks
This screwdriver is used for adjust-
ing the guide roller height.
VROATSV CD
These tapes are especially used for
electrical fine adjustment.
VROBBZGS CB
7k — 30µm
This Jig is used for height
adjustment of the reverse guide.
Guide roller height
adjustment drive
10.
Alignment Tape
X value adjustment
gear type screw driver
Reverse Guide Height
Adjusting Jig
525 Monoscope
Video Audio Hi-Fi Audio Track
525 Monoscope 7k — 58µm
NTSC Color Bar 1k — 58µm
13. JiGRVGH-F18 BU
For X value adjustment