Service manual

13VT-N100

13VT-N150

13VT-CN10

Ë Test points layout of Main Unit.

Measuring Monitor screen

instrument

Mode EP still picture playback

Input signal Self-recording tape

Test point Monitor screen

Control CH '/" (TR ±/ —) buttons

Specification No Vertical jitter

1. Play back the EP Self-recorded tape in the still mode.

2. Using the CH '/" (TR ±/ —) buttons on the remote

control or on the front pannel, make adjustment so that

the vertical jitter becomes minimum.

3. Then press the STOP button to stop the tape.

Note:

The data of this adjustment is memorized to the E

P-ROM

IC.

ADJUSTMENT OF STILL PICTURE

VERTICAL SYNC

Figure 2-2.