Service manual

21
13VT-N100
13VT-N150
13VT-CN10
No. Jig ltem Part No. Code Configuration Remarks
This screwdriver is used for adjust-
ing the guide roller height.
VROATSV CD
These tapes are especially used for
electrical fine adjustment.
This Jig is used for height
adjustment of the reverse guide.
Guide roller height
adjustment drive
10.
Alignment Tape
X value adjustment
gear type screw driver
Reverse Guide Height
Adjusting Jig
Video Audio Hi-Fi Audio Track
525 Monoscope 7k — 58µm
NTSC Color Bar 1k — 58µm
For X value adjustment
11.
12.
13.
JiGDRiVERH-4
JiGDRiVER-6
JiGRVGH-F18
AP
BM
BU
VRONBZGS
VROEBZCS
CB
525 Monoscope
525 Monoscope
7k
1k
—
—
19µm
46/58
µm