Specifications

NIGHTFALL U3

2.Insert the add-on card into the mainboard’s respective slot and x it to the case by

 re-attachingthexationscrew(g.22).

 g.22

10. The pre-installed fan

1.Thepre-installed120mmfrontfanprovidesa4-pinPSUconnectoranda3-pinmainboard

plug.

2.ConnectoneofbothplugstoeithertherespectivePSUor(tocontrolthefanspeedviathe

 mainboard)thematchingmainboardconnector.

11. Installation of additional fans / optimized airﬂow

1.Placethefanagainsttherespectivebracketfromtheinside(e.g.inthetoppanel/g.23).

 g.23

