Manual RUSH FIREGLIDER/FIREGLIDER BLACK
1. 2. 3. 4. 5. 6. 7. Features Specifications Package content The Mouse at a glance Connecting to a PC Installing the software The mouse editor 7.1 Launching the mouse editor 7.2 The user interface (main window) 7.3 The further menus 7.3.1 7.3.2 7.3.3 7.3.4 DPI settings Pulldown menus Mouse gestures Macro manager 7.3.4.1 7.3.4.2 7.3.4.3 7.3.4.4 7.3.4.5 7.3.4.6 7.3.4.7 7.3.
Dear customer! Have a good time with our product! SHARKOON Technologies GmbH 1. Features • • • • • • • • • Laser mouse with 7 buttons (6 of them freely programmable) DPI switch with color display (6 steps) Weight tuning system (max. 19.
• • ENGLISH 3. Package content Rush Fireglider CD with software and manual (as PDF) Note: If you are missing any of the items listed above, please contact customer service via e-mail at support@sharkoon.com or call: + 49 (0) 6403 – 775 6100 Caution laser! Avoid direct eye contact with the laser beam! 4.
ENGLISH B A C A B C – – – Button 6: freely programmable Button 7: freely programmable Grip area A B B B A A A – B – Weight tuning system (max. 19.
1. Plug the mouse’s USB connector to an available USB connector of your PC. 2. The operating system will automatically recognize the mouse and install all needed drivers. 3. If your mouse is not recognized, disconnect it and try another of your PC’s USB connectors. 6. Installing the software 1. 2. 3. 4. 5. Before installing the included software, remove all other installed mouse software from your system. Put the included Tools CD into your CD/DVD drive. Open the CD/DVD drive’s folder (e.g. D:).
fig. 2 “Back” brings you to the previous window, “Cancel” stops the installation process. 7. After the installation is successfully completed, the following window will be displayed (fig. 3). fig. 3 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH 6. Start the installation process by clicking “Install” (fig. 2).
7. The mouse editor 7.1 Launching the mouse editor 1. Start the application by double-clicking the symbol on the desktop or the respective icon in the task bar (fig. 4). fig. 4 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH By choosing “Launch Mouse Editor” the mouse editor will be launched right after completing the installation process by clicking “Finish”.
A B E F ENGLISH 7.2 The user interface (main window) C D F E G A – B – C – D – E – F – G – File menu: see below fig. 5 Profile menu: 2 scripts can be stored on the mouse’s internal memory, select them from the dropdown menu (fig. 6) Minimize window Close window/application Button configuration: different functions may be assigned to all the mouse buttons, select the functions from the respective dropdown menu (see below 7.3.
ENGLISH fig. 5 (file menu) New – Open – Save – Save as – Rename – Read memory – Exit – creates a new profile opens/loads an existing profile saves the current profile under its existing name saves the profile under a new name changes the profile’s name reads the current profile from the internal mouse memory closes the application Open the list by clicking the arrow. Select between Profile 1 and Profile 2. fig.
ENGLISH 7.3 The further menus 7.3.
7.3.2 Pulldown menus A B C fig. 7 A B C – – – Button Menu items Flyout menus with further functions/options RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH The pulldown menus will open up when the button is pressed. The pulldown menus are similar for all mouse buttons (fig. 7).
fig. 8 c) Mouse: clicking the arrow will bring up a flyout menu (fig. 9). Assign mouse functions to the button. fig. 9 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH 2. Select between the following menu items: a) No setting: the button has no function. b) Keyboard: assign keyboard functions to the button (fig. 8).
fig. 10 e) Key combination: clicking the arrow will bring up a flyout menu. Assign a key combination from the set “Text commands” (fig. 11) resp. “File Commands” (fig. 12) to the button. fig. 11 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH d) Office Sets: clicking the arrow will display a flyout menu (fig. 10). Assign office functions to the button.
ENGLISH fig. 12 f) Multimedia: clicking the arrow will bring up a flyout menu (fig. 13). Assign multimedia functions to the button. fig.
fig. 14 h) System: clicking the arrow will bring up a flyout menu (fig 15). Assign a system function to the button. fig. 15 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH g) Internet: clicking the arrow will bring up a flyout menu (fig 14). Assign a browser function to the button.
16-in-1 Mouse Gesture: activate the mouse gesture function (see below 7.3.3). j) Select Macro File: clicking the arrow will bring up a flyout menu (fig 16). Assign a pre-set macro function to the button. fig 16 k) Macro Manager: launch the macro manager (see below 7.3.4). “ button all changes from the 3. By clicking the “ mouse editor will be transferred to the mouse.
7.3.3 Mouse gestures fig. 17 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH The mouse supports 16 so called mouse gestures. This functionality allows to execute various instructions by moving the mouse in a special way (gestures). Eight of these gestures are pre-set and may not be changed, the other eight gestures may be assigned with own functions (fig. 17). The mouse gesture function may be assigned to any button (see above 7.3.2 i).
7.3.4 Macro manager There are 3 ways to create a script: 1. Add the desired functions using the functions buttons and functions modules. 2. Tape mouse movements and key combinations using the record function. 3. Enter instructions using the input area resp. the keyboard connected to the PC. Save your settings by clicking “ “. Via the “ “ button in the main window your settings will be transferred to the mouse.
7.3.4.1 Overview ENGLISH A B C D E F G H K I J L A – B – C – D – E – F – G – H – I – J K L – – – The tabs “Loop”, “Key”, “If” and “Equ” (see below 7.3.4.2) Menu bar Command icons (see below 7.3.4.3) Record function (see below 7.3.4.4) Macro play back mode (see below 7.3.4.5) Insert section repeat (see below 7.3.4.6) Insert jump instruction (see below 7.3.4.7) Define delay time (see below 7.3.4.8) Define absolute and relative mouse cursor movements (see below 7.3.4.
7.3.4.2 The tabs “Loop”, “Key”, “If” and “Equ” 1. ENGLISH The tabs “Loop”, “Key”, “If” and “Equ” allow you to define different instructions which will be copied into the script by clicking the “Plug in” button. Loop: a) Insert section repeat Use the input areas to enter the respective start and end line and define how often this area shall be inserted into the script. Pressing the “Plug in” button will copy the defined section into the script.
3. If: define different conditions and insert them into the script by clicking the “Plug in” button. RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH 2. Key: define the effect of pressing/releasing a button and copy this condition into the script using the “Plug in” button.
7.3.4.3 Command icons A A B C D E – – – – – B C D Save Back Next Cut Copy E F G H I F – – – – G H I Paste Down Up Erase 7.3.4.4 The record function By hitting the “ “ button you can easily create a macro by taping the complete keyboard and mouse actions. The single instructions will simultaneously be displayed in the code area. Using the “ “ button will save the created instruction code. RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH 4.
7.3.4.5 Macro play back mode 7.3.4.6 Time control Tick the check boxes to define if the time delay shall be carried out after pressing the button or after releasing it. The combo boxes allow you to set time unit and time delay. “Plug in” copies your settings to the code area. RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH Choose between the following menu items: 1. Play Macro Once ONLY: the macro will be executed once by pressing the button. 2. Play Macro Repeatedly: the macro will be executed several times.
7.3.4.7 Absolute/relative movements ENGLISH To detect the current absolute coordinates grab the crosshairs ( ) by pressing (and not releasing) the mouse button and moving the crosshairs across the screen. Relative coordinates are defined using the respective input forms. With “Plug in” you copy the settings to the code area. 7.3.5 Further functions More functions and configurations may be accessed by rightclicking the icon “ “ in the task bar.
The following context menu will be displayed (fig. 18): ENGLISH fig. 18 Select between these menu items: 1. Auto Launch on Boot: decides whether the mouse software shall be loaded and started during system’s start. 2. Mouse-Control Panel: opens the user interface of the mouse software. 3. Tilt Wheel Setting (fig. 19): define the scroll rate. “OK” accepts your settings, “Cancel” discards them. fig.
fig. 20 5. Function/Key Reminder (fig 21): decide if the functions of every single mouse button shall be displayed on the screen. fig. 21 RUSH FIREGLIDER/FIREGLIDER BLACK ENGLISH 4. Button Response Time: (fig. 20): adjust the response time for the buttons.
6. Report Rate Setting (fig. 22): ENGLISH fig. 22 7. Open Mouse Editor 8. Exit: closes the context menu.
Legal disclaimer: All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product specifications may vary. The legal rights of the enclosed software belong to the respective owner. Please observe the license terms of the manufacturer before using the software.
