Manual

DRIVELINK USB3.0

Note:

There is no need to install additional drivers.

Before you shut down your PC remove the

DriveLink from your system’s hardware con-

ﬁguration by double-clicking the symbol in

the task bar. A menu will open up. Select the

DriveLink to securely remove it. After that

switch off the DriveLink and shut down your

PC.

4. Installing the hardware

1.   ConnecttheISOpowerconnectorofthe

   includedpowersupplytotheISOpower

   connectoroftheDriveLinkandconnectittoa

power outlet.

2.  ConnecttheincludedUSB3.0cabletothe

   respectiveDriveLinkconnectorandaUSB3.0

   plugofyourPC.

3.  ConnectaSATAdevicetotheDriveLink‘sSATA

connector. The device will be detected and

   installedautomatically.ConnectedHDDs/

   opticaldeviceswillbedisplayedinthe

   WindowsExplorer.