MANUAL DRIVELINK combo USB3.0 DRIVELINK combo USB3.
Table of contents 1. 2. 3. 4. 2. Parts and accessories Features Parts and accessories The device at a glance Installing the hardware A Dear customer! Congratulations on purchasing this premium quality SHARKOON product. For a long product life-time, and to take full advantage of this product, we recommend that you read this manual completely. Have a good time with our product! B C D E SHARKOON Technologies 1. Features • Enables the external usage of 2.5", 3.5" and 5.
. The device at a glance A A – Connector for 2.5" IDE HDDs B – Connector for 3.5" and 5.25" IDE devices a – Data connector for 3.5" IDE HDDs b – 4-pin power connector for 3.5" IDE HDDs C – Write protection for IDE HDDs c – Write protection active LED d – Write protection inactive LED D – Write protection for SATA HDDs e – Write protection active LED f – Write protection inactive LED E – Power LED F – Connector for SATA devices (2.5", 3.5" and 5.
. Installing the hardware Note: Before you plug the DriveLink Combo USB3.0 into your PC/ Laptop, connect the peripheral devices to the DriveLink Combo USB3.0. Before using the hard disk drive for the first time, it must be properly partitioned and formatted. To format the HDD, right-click on COMPUTER and then select MANAGE. If using Windows 7: select START, right-click COMPUTER and then select MANAGE. After that, select DISK MANAGEMENT. Here all formatable HDDs and drives will be clearly displayed.
Warning: For potential loss of data, especially due to inappropriate handling, SHARKOON assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product specifications may vary.
