Install Instructions

Step 1. Use plastic tubing cutters to cut the tubing

between the pointed ends of the repeating 1"

SharkBite imprint pattern. The pattern provides

a visual aid to determine if the tube has been

inserted all the way into the fitting. Ensure the

tube is cut square. A square cut end allows the

tubing to be inserted all the way into the fitting.

Ensure the tube has no rough edges, cuts or

abrasions (rough edges, cuts or abrasions may

damage the O-ring and cause the fitting to leak).

Step 2. SharkBite push-fittings come with integral tube

support liners. Ensure that the support liner is

in place. The liner reinforces the wall of the

PEX tubing to help prevent collapse of the

tubing wall.

Step 3. Insert the tube into the fitting until the tube

reaches the tube stop. Make sure the pointed

end of the SharkBite pattern is even with the

end of the release collar. Only when the tube

reaches the tube stop has a secure joint

been created.

Note: Install SharkBite push-fittings at least 1" apart

to enable disassembly of the joint.

Making a SharkBite

Push-Fitting Connection

The combination of SharkBite push-fittings and PEX tubing offers

the fastest, easiest installation from meter to fixture.