Install Instructions

5
PEX Tube Support Liner Removal
The tube liner is not necessary with CPVC or Copper tubing, and may be removed based
on preference or local codes.The tube liner can be easily removed by pulling it past the
o-ring, then with the aid of the SharkBite
®
disassembly clip or fork tool (both sold separately),
the Tube Support Liner can drop out of the fitting as it can move freely past the grab ring.
Needle nosed pliers may be used to pull the Tube Support Liner out.
Gently work the Tube Support Liner past the o-ring
Stop once the Tube Support Liner has been pulled past the o-ring, the Tube Support Liner
cannot be pulled out any further due to the grab ring.
Put the disassembly tongs (or clip) in place and squeeze them together. This will cause
the grab ring teeth to spread.
PEX Tube Support Liner Removal
The tube liner is not necessary with CPVC or Copper tubing, and may be removed based
on preference or local codes.The tube liner can be easily removed by pulling it past the
o-ring, then with the aid of the SharkBite
®
disassembly clip or fork tool (both sold separately),
the Tube Support Liner can drop out of the fitting as it can move freely past the grab ring.
Needle nosed pliers may be used to pull the Tube Support Liner out.
Gently work the Tube Support Liner past the o-ring
Stop once the Tube Support Liner has been pulled past the o-ring, the Tube Support Liner
cannot be pulled out any further due to the grab ring.
Put the disassembly tongs (or clip) in place and squeeze them together. This will cause
the grab ring teeth to spread.