Brochure

5
LIGHTNING FAST. WON’T LET GO.
1-877-700-4242 www.sharkbitepro.com
End Stops
SIZE P/N P/ N
(Lead Free)
3/8" (1/2" OD) U512
U512LF*
1/2" U514 U514LF
5/8" U516
–
3/4" U518 U518LF
1" U520 U520LF
Fitting Reducers (Use to connect to smaller pipe sizes)
3/8" (1/2" OD) X1/2" CTS
U719 U719LF**
3/8" (1/2" OD) X3/4" CTS
U721 U721LF**
1/2" X1" CTS U722 U722LF**
3/4" X1" CTS U724 U724LF**
Threaded Adapters
3/4 " CTS X 3/4 " FNPT U766 U766LF*
1" CTS X1" FNPT U772 U772LF**
Slip Fittings - For use with copper only.
Slip fittings simplify repair by doing the job that two couplings and extra pipe
used to do. Only one end of the coupling has a stop, allowing the other end to
slide freely over the end of a pipe. The fitting can be released with a disconnect
tool and slid back onto the other end of the pipe for successful leak repair.
Slip Couplings
1/2" U3008 U3008LF
3/4" U3016 U3016LF
1" U3020 U3020LF
Slip Tees
1/2" U3362 U3362LF
3/4" U3370 U3370LF
1/2" X1/2" X1/2" FNPT U3482 U3482LF
3/4" X3/4" X3/4" FNPT U3486 U3486LF
Service Slip Tee Adapter
1/2" X1/2" X1/2" CTS U4482 U4482LF
Water Hammer Arrestor
Provides maintenance-free, continuous protection
against water hammer. Can be positioned vertically or
horizontally and the SharkBite
®
connectors allow the
arrestor to be installed in seconds, even on wet pipe.
1/2" Residential 22630 –
1/2" Commercial 22631 –
3/4" Residential 22632 –
1" Commercial 22633 –
ManifoldswithSharkBite®Push-tBranches
Manifolds are traditionally used in PEX systems, but this
new SharkBite manifold will allow easy incorporation
into copper or CPVC systems. Use SharkBite push fit-
tings to install these manifolds anywhere in a plumbing
system. All manifolds have a 1" trunk with 3/4" tube
inlets & outlets and 1/2" push-fit ports (2" on center).
3 port open 22995 22995LF
3 port closed 22996 22996LF
4 port open 22997 22997LF
4 port closed 22998 22998LF
Flexible Water Heater Connectors
The stainless steel braided flexible hose and the rotatability of the SharkBite
fitting allow making connections in tight spaces without additional fitting,
soldering or glue. Available with integral ball valve.
1/2"X3/4" FIP, 12" U3068FLEX12
U3068FLEX12LF
1/2"X3/4" FIP, 15" U3068FLEX15
U3068FLEX15LF
1/2"X3/4" FIP, 18" U3068FLEX18
U3068FLEX18LF
1/2"X3/4" FIP, 24" U3068FLEX24
U3068FLEX24LF
3/4"X3/4” FIP, 12" U3088FLEX12
U3088FLEX12LF
3/4"X3/4" FIP, 15" U3088FLEX15
U3088FLEX15LF
3/4"X3/4" FIP, 18" U3088FLEX18
U3088FLEX18LF
3/4"X3/4" FIP, 24" U3088FLEX24
U3088FLEX24LF
1/2"BV X 3/4" FIP,18"
U3068FLEX18BV
U3068FLEX18BVLF
3/4" B V X 3/4" F I P,18 "
U3088FLEX18BV
U3088FLEX18BVLF
Water Heater Installation Kit
Kits include 2 SharkBite
®
connector  ttings and a disconnect clip.
1/2" X3/4"FNPT 22604 22604LF
3/4" X3/4"FNPT 22441 22441LF
Contractor Kits
These SharkBite
®
Kits include a variety of push- t  ttings, disconnect tongs
and clips, and a sturdy case for storage and transport. Cash Acme’s
SharkBite Connection System is a revolutionary solution for connecting or
repairing water distribution pipe.
Contractor Kit
Includes 2 each: U008, U016, U058, U072, U088, U120, U134, U248 and
U256. 1 each: U362, U370, U514, U518, U710, U711, U713 and U702.
22486 22486LF
Irrigation Kit
Includes 2 each: U016, U020, U134, U140, U256 and U260. 1 each: U088,
U094, U370, U374, U518, U520, U702, U712, U713, U714, U715, U766,
U772 and U3016.
22795 –
Available: *September 2010, **December 2010