How to Guide
34 
 IAPMO RESEARCH AND TESTING, INC. 
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • 
www.iapmort.org 
CERTIFICATE OF LISTING 
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify 
compliance  to  the  requirements  of  applicable codes  and  standards.  This  activity  is  coupled with  periodic  surveillance of  the supplier's  factory  and  warehouses  as well  as  the 
assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, 
assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. 
Effective Date: 
December 2014 -Rev. 9/22/2015- 
Void After: December 2015 
Product: 
Drinking Water System Components - Health Effects 
File No. N-4630 
Issued To: 
Cash Acme/Reliance Worldwide 
2400 7TH AVE. SW 
CULLMAN, AL 35055 
Identification: 
Each product shall be permanently and legibly marked with the manufacturer's name 
or trademark. The product may also be marked with the standard designation 
"NSF/ANSI 61". 
Characteristics: 
Materials or products that come into contact with drinking water and/or drinking 
water treatment chemicals. Products and materials may include process media, 
protective materials, joining and sealing materials, pipes and related products, 
mechanical devices used with treatment/transmission/distribution systems, and 
mechanical plumbing devices. To be installed in accordance with the 
manufacturer's instruction. Lead free requirements are addressed under a separate 
certificate of listing. 
Products listed on this certificate have been tested by an IAPMO R&T recognized 
laboratory. This recognition has been granted based upon the laboratory's 
compliance to the applicable requirements of ISO/IEC 17025. 
Products are in compliance with the following standard(s): 
NSF/ANSI 61-2013 
For a complete list of compliant models and the most up to date listing, please visit 
http://pld.iapmo.org/file_info.asp?file_no=N4630   
10/9/2015 










