Lift-Away® Upright Vacuum ZU780 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. WARNING To reduce the risk of fire, electric shock, injury, or property damage: GENERAL WARNINGS 1. Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/ or vacuum pod.
ASSEMBLY ASSEMBLY 3 (Click) 5 (Click) 2 (Click) 1 (Click) 1. 2. 3. 4. 5. 4 (Click) Place Motorized Floor Nozzle on floor and attach Pod, pressing it in until it clicks securely into place. Insert Wand into pod, pressing it in until it clicks securely into place. Insert Handle into wand, pressing it in until it clicks securely into place. Connect Hose into back of pod, pressing it in until it clicks securely into place. Insert hose clip into back of handle until it clicks into place.
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES HARD FLOOR If the light is illuminated, the vacuum is in Carpet mode. To clean hard floors, press the selector button to switch to Hard Floor mode. When the light is NOT illuminated, the vacuum is in Hard Floor mode, and the brushrolls will spin slower. CARPET For Carpet cleaning, press the button and it will illuminate in green. The brushrolls will spin faster.
EMPTYING THE DUST CUP IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING AND REPLACING THE FILTERS CLEANING FILTERS Regularly clean and replace your filters to keep your vacuum's suction power optimal. To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts. IMPORTANT: DO NOT use soap when cleaning the filters.
MAINTENANCE CHECKING FOR BLOCKAGES Zero-M® Technology Zero-M technology actively removes hair wrap from your brushroll while you vacuum. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll. CLEANING THE BRUSHROLL Detach hose from vacuum pod, and check hose and opening on back of pod for blockages. Detach wand from floor nozzle and handle, and check both ends for blockages.
ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM A B C D E F G H I J K L M 12-inch Crevice Tool Duster Crevice Tool Dusting Brush Multi-Angle Dusting Brush Anti-Allergen Dust Brush Upholstery Tool Wide Upholstery Tool Pet Multi-Tool Under-Appliance Wand Pet Power Brush Home & Car Detail Kit Precision Duster Accessory Bag A B C D E F G J K H L I M NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's configuration.
FIVE (5) YEAR LIMITED WARRANTY The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® vacuum. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.
