Rocket® Corded Ultra-Light Vacuum ZS350 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. 17. Use extra care when cleaning on stairs. 18.
ASSEMBLY SETTINGS 1 2 OFF SETTING I SETTING II (Click) Slide switch to the bottom to turn off power. To begin vacuuming, slide switch to the appropriate setting. Bare Floor/Area Rugs The brushroll spins slowly to clean bare floors and delicate area rugs. High Pile Carpets The brushroll spins faster to pick up debris below the surface of your carpets. (Click) NOTE: F or deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, High Pile Carpets. CLEANING MODES 1.
STORAGE ONBOARD HOOK AVAILABLE ACCESSORIES WALL MOUNT NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's configuration. To order additional accessories, visit sharkaccessories.com. A 12" Crevice Tool A B C D E F G H Clean in tight spaces or reach baseboards and ceilings with this slim crevice tool. B D usting Brush Dust shelves, baseboards, window/door frames, and much more.
MAINTENANCE MAINTENANCE IMPORTANT: Unplug the vacuum before performing any maintenance. IMPORTANT: Unplug the vacuum before performing any maintenance. EMPTYING THE DUST CUP CLEANING FILTERS The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line. Perform regular maintenance on your filters to keep your vacuum's suction power optimal. IMPORTANT: To prevent damage, rinse filters with water ONLY. DO NOT use soap.
MAINTENANCE MAINTENANCE CHECKING FOR BLOCKAGES CLEANER HEAD MAINTENANCE CHECK HANDHELD CHECK WAND Zero-M™ Technology actively removes hair wrap from your brushroll while you vacuum. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll. NOTE: If any hair is wrapped around the brushroll, continue cleaning, using High Pile Carpet mode on a bare floor surface, or a low-pile carpet or area rug.
TROUBLESHOOTING Vacuum is not picking up debris. No suction or light suction. (Refer to Maintenance section for more information.) • heck filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the C filters before reinserting in the vacuum. • Dust cup may be full; empty dust cup. • Check cleaner head for blockages; clear blockages if required. • Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
NOTES s h a r kc l e a n . c o m NOTES s h a r kc l e a n .
REGISTER YOUR PURCHASE registeryourshark.
