SDS

Page 4/7
Dyson Battery Pack 7-Cell (206340)
Revision: 10
Revised date: 15-January -2019
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Do not disassemble, open, remodel, or solder. Do not short + and – terminals with metal.
Charge with a Dyson charger designed for use with this battery pack.
The battery may present a risk of fire or burns if mistreated. Do not disassemble, crush,
short contacts, heat above 140°F (100°C), or incinerate. Do not use pack if damaged.
7.2. Conditions for safe storage, including any incompatibilities
Store at < 45°C. Avoid overheating, e.g. through incident solar radiation or radiant heat
source. Do not expose to water or condensation.
SECTION 8: Exposure controls/personal protection
8.2. Exposure controls
Personal Protection is not required under normal usage.
In the unlikely event that liquid leaks from the battery do not touch the liquid. Provide
appropriate ventilation, do not inhale vapour, use gas masks for organic gases if
necessary. Wear safety glasses, safety gloves, and clean up according to Section 6.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical State
Solid
Colour
N/A
Odour
None
pH-
N/A
Relative density
N/A
Solubility in water (g/L)
Insoluble
SECTION 10: Stability and reactivity
10.2. Chemical stability
Stable under normal conditions.
10.4. Conditions to avoid
High temperature (>100°C) exposure of battery pack.
Deformation by crush will cause generation of heat and ignition.
Avoid mechanical or electrical abuse.
Avoid contact with corrosive chemicals.
SECTION 11: Toxicological information
No information as a battery pack