Operation Manual

4
FREEPHONE 0800 862 0453
QUICK START
4 Press the speed button on the
right with your foot to change the
speeds. One light “LO” indicates
the speed optimized to clean
bare floors and two lights “HI”
indicate the speed optimized to
clean carpets and larger debris
on bare floors. (Fig. 4)
IMPORTANT: Before you can start using your new Cordless
Sweeper, charge it for 3.5 hours.
NOTE: The charging adapter will be shipped inside the
packaging.
ASSEMBLE
1 Insert the lower telescopic tube
into the head connector (a).
Then insert the upper telescopic
tube into the lower extension
tube (b). Now attach the upper
handle to the upper telescopic
tube. (Fig. 1)
CLEAN
2 Pull back on the handle and
press lightly on the body of the
unit with your foot to engage the
steering. (Fig. 2)
3 Using your foot, press the power
button and push the unit forward
over the surface you wish to
clean. (Fig. 3)
Fig. 1
Fig. 2
Fig. 4
Fig. 3
b
a