User`s guide

7
CARE AND MAINTENANCE
To improve the performance and life of your unit, we recommend you do the
following:
1. Once a month clean the unit with a dry cloth, including the chamber which the dust
container fits into. Remove any hair, fiber or other materials that may have built up
in the chamber, on the rotating brush.
2. Don’t use abrasive materials to clean the sweeper. Do not immerse the unit in
water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces.
5. Don’t pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
STORING THE CORDLESS SWEEPER
Your cordless sweeper may be stored by using the slot on the back of the upper handle
and hanging it from a screw secured to a wal
l or other vertical surface. Use a #6 flat or
pan head screw with the appropriate hardware for the surface that the sweeper will be
mounted on, (i.e. gyproc). Allow the screw head to extend a approximately 3/16" from
the mounting surface. Always empty your sweeper before hanging up for storage.
OPERATING INSTRUCTIONS
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
SWEEPER WILL
NOT OPERATE
1. Batteries discharged.
2. No power in electrical
outlet supplying charging
adapter.
3. Unit needs servicing.
4. Battery misplaced.
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call Customer Service.
4. Connect the wire terminal from
the unit to the wire terminal of
the new battery pack.
SWEEPER WILL
NOT PICK-UP
1. Dust container is full.
2. Unit needs recharging.
1. Empty dust container.
2. Charge unit.
DUST ESCAPING
FROM SWEEPER
1. Dust container is full. 1. Empty dust container.
ROTATING BRUSH
WILL NOT PICK UP
1. Unit clogged.
2. Dust container is full.
1. Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2. Empty and clean dust
container.
SWEEPER WILL
NOT CHARGE
1. Electrical outlet not
working.
2. Charging Adapter not
working.
3. Batteries no longer
functioning.
4. Unit left in “On” position.
1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace charging adapter.
3. See battery disposal.
4. Press switch to “Off”.
7
SOIN ET ENTRETIEN
Afin d’augmenter le rendement et la durée de vie de votre appareil, nous vous
recommandons de respecter les consignes suivantes:
1. Une fois par mois, nettoyez l’appareil à l’aide d’un linge sec, incluant le réceptacle de
la coupelle à poussière. Retirez tout cheveu, fibre ou autre produit ayant pu
s’accumuler dans le réceptacle ou sur la brosse rotative.
2. N’utilisez pas de produit abrasif pour nettoyer la balayeuse. N’immergez pas cet
appareil.
3. Ne ramassez pas de liquide ne l’utilisez pas sur les planchers mouillés.
4. N’utilisez pas l’appareil sur le ciment, le goudron ou d’autres surfaces similaires.
5. Ne ramassez pas de fil ou de tissu avec la balayeuse.
6. Ne nettoyez pas de tapis effiloché ou de Malte avec la balayeuse.
RANGEMENT DE VOTRE BALAYEUSE SANS FIL
Pour ranger votre balayeuse sans fil, vous n’avez qu’à la suspendre sur une vis murale
ou sur une autre surface verticale à l’aide de la fente située à l’endos de la poignée
supérieure. Utilisez une vis à tête plate ou à tête cylindrique bombée numéro 6, d’un
matériau approprié pour la surface sur laquelle la balayeuse reposera (ex. : gypse).
Laissez la tête de la vis dépasser de la surface d’environ 3/16 po. Videz toujours votre
balayeuse avant de la suspendre pour la ranger.
MODE D’EMPLOI