Operator`s manual

SHARK SSD DIESEL • #97-6167 • REV. 7/05

OPERATOR’S MANUAL

PRESSURE WASHER

The five color-coded quick connect

nozzles provide a wide array of

spray widths from 0° to 40° and are

easily accessible when placed in the

convenient rubber nozzle holder,

which is provided on the front of the

machine.

NOTE: For a more gentle rinse, se-

lect the white 40° or green 25°

nozzle. To scour the surface, select

the yellow 15° or red 0° nozzle. To

apply detergent select the black

nozzle.

WARNING! Never replace

nozzles without engaging the

safety latch on the spray gun

trigger.

Safety

Latch

OPERATING INSTRUCTIONS

STEP 1: Check engine oil level. Oil level should be level with the bottom of the oil filler neck. (Refer to the engine's

operating manual included with machine.) We recommend that the oil be changed after the first 5 hours of use,

then once every 50 hours. Note: Improper oil levels will cause low oil sensor to shut off engine. IMPORTANT! Do

not run engine with high or low oil levels as this will cause engine damage.

STEP 2: Fill engine fuel tank with

Diesel fuel.

Oil Dipstick

Fuel

Tank

STEP 3: Trigger the spray gun to

eliminate trapped air then wait for

a steady flow of water to emerge

from the spray nozzle.

STEP 4: Read engine operators

manual before starting. Turn the en-

gine switch to "Start" position.

Engine

On-Off

Switch

Oil Filler

Cap

NOZZLES