Operator`s manual

SHARK SSD DIESEL • #97-6167 • REV. 7/05
OPERATOR’S MANUAL
PRESSURE WASHER
6
COMPONENT IDENTIFICATION
Pump — Develops high pressure by pumping water
volume through nozzle.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device. In-
cludes safety latch.
Detergent Metering Valve — Controls detergent mix-
ture.
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray gun.
Pressure Nozzle — Inserted into wand quick coupler
to develop pressure
Adjustable Thermostat — Prevents water tempera-
ture from exceeding high temperatures. Is not used to
maintain constant temperature setting.
High
Pressure
Hose
Wand
Spray Gun
Trigger/Safety
Latch
Detergent Bucket
(not included)
Nozzle Quick
Coupler
Diesel Fuel
Tank
Water
Supply Hose
(not
included)
Flue Adapter
Optional 7-10049
Insulation Gasket
Optional 7-01471
Burner Switch
Pressure
Nozzle
Adjustable
Thermostat
Quick
Coupler
Detergent
Pick-up Hose
Inlet Connection
Detergent
Metering
Valve
Note: Burner air adjustment must
be tested after installation.
Pump