Use and Care Manual

12sharkclean.com
English
How to Attach/Detach:
• First attach the Accessory Hose to the Handheld Steamer by snapping the Accessory Hose into the main nozzle.
(fig. 18)
• Slide the pad over the Small Above-Floor Pocket Tool so it fits snugly. Cinch the elastic band and slide the locking
toggle to securely tighten the pad over the tool.
• Connect the Small Above-Floor Pocket Tool to the steam nozzle at the end of the accessory hose. Slide the base
of the tool over the tip of the nozzle until the tool clicks securely into place. (fig. 19)
• Do not use the Small Above-Floor Pocket Tool without the pad attached.
• To remove, wait 2 to 3 minutes for the tool to cool, hold the release button and pull the tool away from the unit.
Usage:
• The Small Above-Floor Pocket Tool is ideal for small, uneven surfaces. The pointed tip is great for edges and
corners. (fig. 20)
Cleaning Tips:
• Additional attachments are available for your accessory hose. Please visit sharkaccessories.com for more
information.
Using the Accessory Hose and the Small Above-Floor Pocket Tool
fig. 19fig. 18 fig. 20
CAUTION: Make sure the Handheld Steamer is unplugged or in Standby mode while attaching or
removing the accessory. Avoid touching the accessory, as it will be very hot after steaming.
CAUTION: To avoid scalding injuries, always unplug and allow the Steam Mop to cool before removing or
changing accessories or pads.
For a full list of what is included with your Steam Mop, please refer to box's top panel.