Operation Manual

TOLL FREE: 1-800-798-7398
11
English
www.sharkclean.com
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean
hard to reach nooks & crannies and other places where dirt may build up.
Use the Direct Steam nozzle to loosen and dislodge compact dirt often
found in corners and tight places where traditional methods and cleaning
tools tend to push dirt into, making it tough to reach and clean. Spray
direct steam and wipe clean with a wet cloth or paper towel.
CAUTION: Do not press steam
trigger until the Direct Steam Nozzle
is snapped into the main nozzle of
your Handheld Steamer.
3 To remove the Direct Steam Nozzle
attachment, press and hold down the
release buttons. Then slide off of the
Handheld Steamer.
CAUTION: Do not press steam
trigger while removing the Direct
Steam Nozzle. Avoid touching the tip
of the Direct Steam Nozzle, as this
will be very hot after steaming.
NOTE: The Handheld Steamer may
continue to emit steam for a few
seconds after the trigger is released.
This is normal, and the steaming will
eventually come to a stop.
1 For spot cleaning and steaming,
first attach the Direct Steam Nozzle
by pressing the nozzle onto the
Handheld Steamer until it clicks
into place. (fig. 17)
2 Then press and hold the steam
trigger button to start steaming.
While the steam trigger button is
pressed and held down, the
ON/STANDBY will be solid blue.
When released, the ON/STANDBY
will return to flashing blue. (fig. 18).
For effective cleaning, hold the
steam output nozzle 1-2 inches away
from the surface you’re cleaning.
fig. 17
fig. 18
Using Your Handheld Steamer
with Direct Steam Nozzle