Specifications

9
www.lakeland.co.uk
Your Shark
®
Lift-Away
™
Pro
Steam Pocket
®
Mop is designed to clean
surfaces that will withstand high heat
and moisture. Do not use on unsealed
wood surfaces (especially wooden
antique furniture), unglazed ceramic
tile, painted surfaces or surfaces that
have been treated with wax, oils,
varnishes, or shellac. The sheen may be
removed by the heat, steam, and friction
of the cleaning tools. Lacquer and
polyurethane coatings provide a hard
durable protective finish that withstands
moisture, but it is always recommended
to test an isolated area of the surface to
be cleaned before proceeding.
We also recommend you check the use
and care instructions from the surface
manufacturer.
When cleaning finished wood surfaces,
use broad, continuous cleaning strokes.
To prevent surface damage, avoid
focusing steam or allowing the cleaning
tools to sit in one spot for any amount
of time.
NOTE: While the Shark
®
Lift-Away
™
Pro Steam Pocket
®
Mop will operate
in one of three steam settings in
the mop mode, your removable
Handheld Steamer is programmed to
function on just one steam setting.
This setting is optimised for above-
the-floor cleaning.
Getting Started With Your
Removable Handheld Steamer
IMPORTANT: Before removing the
Handheld Steamer from the Steam
Mop Housing, make sure that the unit
is not actively steaming. The ON/
STANDBY button should be flashing
blue. If the ON/STANDBY button is
solid blue, then press the button until
it returns to flashing blue.
1 To remove the Handheld Steamer,
press and hold down the Handheld
Release Buttons while pulling out the
Handheld Steamer. (fig. 15)
fig. 15
S3901UKL_11_IB_E_111020_1.indd 9 11-10-20 11:19 AM