Specifications

5
www.sharkclean.co.uk
IMPORTANT: Make sure you do not use the
mop without attaching a cleaning pad and
adding water to the tank first. When you are
using the mop for the first time, it might take
longer than the normal 30 seconds to start
steaming.
Using Your Steam Mop
fig. 7
fig. 8
NOTE: Sweep or vacuum your floors prior to
cleaning with your Steam Mop.
1 Pull and twist the quick release cord holder to
unwrap the power cord completely. Plug into a
220-240-volt electrical outlet. (fig. 7)
2 The ON/STEAM SETTING button will be blue.
If the light does not turn on, reference the
troubleshooting section on page 17. (fig. 8)
S3901UKJR_11_IB_E_120411_3.indd 5 12-04-11 3:51 PM