WWW.SHARKCLEAN.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK® STEAM MOP, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR STEAM MOP. DANGER OF SCALDING. Please use caution when using the steam mop. The steam emitted from the steam mop is very hot. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way.
11. DO NOT unplug by pulling on power cord. To unplug, grasp the plug not the power cord. Do not use extension cords or outlets with inadequate current carrying capacity. 12. DO NOT put any objects into openings. Do not use with any opening that is blocked. 13. DO NOT put hands or feet under the steam mop. Unit gets very hot. 14. Use ONLY on flat, horizontal surfaces. Do not use on walls, counters or windows. 15.
This manual covers model number: S3601W 11 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 1550 Watts Water Capacity: 500ml (16.9 oz.
Contents Thank you for purchasing the Shark® Pro Steam Pocket® Mop. Getting Started.......................................................................2 Using Your Steam Mop........................................................5 Using Your Carpet Glider....................................................9 Using the Accessories..........................................................10 Care of Your Steam Mop.....................................................11 Troubleshooting Guide.................
Getting Started When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark® Pro Steam Pocket® Mop.
fig. 1 IMPORTANT: First things first, always make sure the mop is UNPLUGGED from the wall when not in use. Never fill the mop, attach the mop head, change or remove the microfiber cleaning pad when the mop is plugged into the wall. To prolong the life of your Shark® Pro Steam Pocket® Mop, we recommend using distilled water. Make sure you only add water to the tank. Chemicals or cleaning solution may damage the appliance and could be unsafe for you and your family.
Getting Started - cont’d fig. 2 fig. 5 fig. 3 2 Use the lavender loop on the side of the micro-fiber cleaning pad to slide mop head into pad pocket. Then secure the quick fasteners on the top of the pocket to lock in place. (fig. 2) 3 Snap the mop head into the base to secure it. (fig. 3) 4 Turn the water tank cap counter clockwise and remove from the tank. (fig. 4) Use the filling flask and pour water into the tank. Please don’t overfill. Replace the cap on the water tank. (fig. 5) 4 fig.
Using Your Steam Mop IMPORTANT: Make sure you don’t use the mop without attaching a micro-fiber cleaning pad and adding water to the tank first. When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming. fig. 7 fig. 6 I MPORTANT: Your Steam Mop needs water to make steam! Never use your steam mop without water in the tank. Sweep or vacuum your floors prior to cleaning with your Steam Mop. Visit www.sharkclean.
Using Your Steam Mop - cont’d fig. 9 fig. 10 fig. 8 3 Press the ON/STANDBY button once for dust setting (DUST lighted setting indicator will illuminate). DUST setting is light steam for a quick dusting and best dry time. (fig. 8) Press the ON/STANDBY button a second time to activate the MOP setting. MOP setting is for normal, everyday steam cleaning. (fig. 9) Press the ON/STANDBY button a third time to activate the SCRUB setting. SCRUB setting is for heavy cleaning and will leave floors damp.
The Shark® Pro Steam Pocket® Mop has three unique steam settings so you can use the perfect amount of steam for the cleaning task at hand. See below for tips on when to use each setting.
Using Your Steam Mop - cont’d fig. 11 5 When one side of the micro-fiber cleaning pad gets dirty, just flip the mop head and you can quickly start using the other side. (fig. 11) 6 When the water tank is empty, the steam mop will stop producing steam. You can refill the water tank at any time as long as the mop is unplugged from the outlet. Follow the instructions from page 4. This applies to switching the mop heads or micro-fiber cleaning pad as well.
Using Your Carpet Glider The Steam Mop is great for grooming and freshening though it won’t clean your carpet or area rugs. fig. 12 fig. 13 THE CARPET GLIDER 1 The Carpet Glider can be used with the all-purpose head to lightly steam your carpet and area rugs. Just place the mop head with micro-fiber cleaning pad attached on top of the glider. The recommended steam setting is SCRUB when using the carpet glider. (fig. 12) 2 Move the steam mop back and forth across a section of the carpet.
Using the Accessories The Steam Concentrator is designed for use on floors only. Do not use on countertops, walls or other vertical surfaces. fig. 14 fig. 15 USING THE STEAM CONCENTRATOR 1 Remove the mop head from the base. 2 Snap the Steam Concentrator nozzle onto the base of the mop. (fig. 14) 3 We recommend using the Steam Concentrator in the SCRUB setting. Press the ON/STANDBY button three times to SCRUB mode.
Care of Your Steam Mop fig. 16 fig. 17 AFTER USE AND STORAGE 1 When you have finished using the steam mop, press the ON/STANDBY switch until the LED light turns flashing BLUE. This stops the unit from steaming. Unplug the cord from the outlet and place the mop into the upright position. Let the unit cool for 2-3 minutes. Remove the micro-fiber cleaning pad by releasing the quick fasteners and using the lavender loop on the side of the pocket, avoiding contact with the hot pad or dirt. (fig. 16) fig.
Care of Your Steam Mop - cont’d To order additional parts and accessories, feel free to contact us at www.SharkClean.com or call 1-800-798-7398. fig. 19 CARE OF YOUR MICRO-FIBER CLEANING PAD 1 We recommend washing your micro-fiber cleaning pad separately from other fabrics to avoid picking up lint. Only use liquid detergent (no powder detergent). Don’t use any fabric softeners or bleach. Line dry or dry on a low dryer setting. (fig.
Troubleshooting Guide PROBLEM The Pro Steam Pocket® Mop will not turn-on. The unit will not make steam. Cannot select steam setting/flashing blue light remains on. POSSIBLE REASONS & SOLUTIONS Your steam mop should be securely plugged into a 120V AC electrical outlet only. Check your fuse or breaker. If your unit still does not work, call 1-800-798-7398. Is there water in the water tank? If not, add water to your steam mop following instructions on page 4.
Notes 14 TOLL FREE: 1-800-798-7398
Notes www.sharkclean.
Notes 16 TOLL FREE: 1-800-798-7398
ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid.
U.S.: EURO-PRO Operating LLC Newton, MA 02459 Canada: EURO-PRO Operating LLC 4400 Bois Franc Ville St. Laurent, Québec H4S 1A7 1-800-798-7398 www.sharkclean.com COPYRIGHT© EURO-PRO OPERATING LLC 2011 PRINTED IN CHINA S3601W.E.110415 Illustrations may differ from actual product. US Patent Nos.
