Operation Manual

5
www.sharkclean.com
IMPORTANT: Your Steam Mop needs
water to make steam! Never use your
steam mop without water in the tank.
Sweep or vacuum your floors prior to
cleaning with your Steam Mop.
Visit www.sharkclean.com for other
great quick cleaning products to
complement your Steam Mop, such as
the Shark
®
Navigator (model NV350).
1 Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into an electrical
outlet. (fig. 6)
2 The ON/STANDBY switch will flash
blue. If the light does not turn on,
reference the troubleshooting section
on page 12. (fig. 7)
IMPORTANT: Make sure you don’t
use the mop without attaching a
cleaning pad and adding water to the
tank first. When you are using the
mop for the first time, it might take
longer than the normal 30 seconds
to start steaming.
Using Your Steam Mop
fig. 6
fig. 7
S3601CO_N_11_IB_E_130304_4.indd 5 13-03-04 2:53 PM