Operation Manual

4
TOLL FREE: 1 -8 00-79 8-7398
Getting Started - cont’d
IMPORTANT: Don’t use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
2 Use the lavender loop on the side of
the cleaning pad to slide mop head
into pad pocket. Then secure the
quick fasteners on the top of the
pocket to lock in place. (fig. 2)
3 Snap the mop head into the mop
body until you hear it latch into
place. (fig. 3)
4 Turn the water tank cap counter
clockwise and remove from the tank.
(fig. 4)
Use the filling flask and pour water
into the tank. Please don’t overfill.
Replace the cap on the water tank.
(fig. 5)
fig. 2
fig. 3
fig. 4
fig. 5
S3601CO_N_11_IB_E_130304_4.indd 4 13-03-04 2:53 PM