Specifications

5
www.sharkclean.co.uk
s
t
e
a
m
c
o
n
t
r
o
l
IMPORTANT: Sweep or vacuum your
floors prior to cleaning with your
Steam Mop.
1 Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into a 220-240-volt
electrical outlet. (fig. 6)
2 The STEAM CONTROL button will
flash blue. If the light does not turn
on, reference the troubleshooting
section on page 10. (fig. 7)
IMPORTANT: Do not use the mop
without attaching a microfibre
cleaning pad and adding water to the
tank first. When you are using the
mop for the first time, it might take
longer than the normal 30 seconds
to start steaming.
Using Your Steam Mop
fig. 6
fig. 7