ION TM Robot Vacuum RV760 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. WARNING To reduce the risk of fire, electric shock, injury, or property damage: GENERAL WARNINGS 1. Robotic vacuum cleaner consists of a robotic vacuum and charging dock with power supply.
ABOUT THE SHARK IONTM ROBOT ABOUT THE SHARK IONTM ROBOT With Auto-Sense Navigation, your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and it may not cover every area in a single cleaning. For best results, prepare your home as indicated below, and schedule a daily cleaning to ensure all floor areas are regularly maintained.
PREPARING FOR USE CHARGING THE SHARK IONTM ROBOT INSTALLING THE SIDE BRUSHES CHARGING Snap the 2 included Side Brushes onto the square posts on the bottom of the robot. CHARGING DOCK SET-UP IMPORTANT: The Shark Robot has a pre-installed rechargeable battery. Battery must be fully charged before using. To charge, the Power button on the side of the robot must be in the ON position (I). When the cleaning cycle is complete, or if the battery is running low, the robot will search for the dock.
CHARGING THE SHARK IONTM ROBOT USING THE SHARK ION TM ROBOT CHARGE INDICATOR LIGHTS BUTTONS AND INDICATOR LIGHTS CLEAN BUTTON Press to begin a cleaning session. Press again to stop. In Use Full Charge Clean Dock Nearly Full Mid Charge Low Charge Clean Max Dock While Charging Clean Max Max Dock No Charge or Off DOCK BUTTON The blue charge indicator lights show how much charge is remaining. While the robot is charging, all three blue LED lights will cycle.
USING THE SHARK ION TM ROBOT USING THE SHARK ION TM ROBOT USING THE SHARK CLEAN™ APP AND VOICE CONTROLS BotBoundary® strips The Shark Clean app will guide you through easy setup of your robot. Control the unit remotely: To keep your robot away from certain areas, such as pet bowls, fragile objects, power strips, or doorways, use the BotBoundary strips to quickly and easily create “no-go zones”. • Schedule cleaning times for up to 7 days a week.
MAINTENANCE MAINTENANCE CLEANING THE FILTER CAUTION: Turn off power before performing any maintenance. CLEAN FILTER EVERY WEEK. REPLACE FILTER EVERY TWO MONTHS. See sharkaccessories.com for replacement filters. EMPTYING THE DUST BIN EMPTY DUST BIN AFTER EACH USE. Press the Dust Bin Release Button and slide out the dust bin. Remove and empty the dust bin. Clean any hair or debris off the Anti-Tangle Comb on the back of the dust bin. Pull filter out of the dust bin by the tabs.
MAINTENANCE MAINTENANCE CLEANING THE MULTI-SURFACE BRUSHROLL CLEANING SENSORS AND CHARGING PADS THE BRUSHROLL NEEDS OCCASIONAL MAINTENANCE. REPLACE BRUSHROLL EVERY 6 to 12 MONTHS, OR WHEN VISIBLY WORN. See sharkaccessories.com for replacement parts. Push up on the tabs on the brushroll access door, then lift off the door. Lift out the brushroll. CLEAN SENSORS AND CHARGING PADS PERIODICALLY AS NEEDED.
MAINTENANCE MAINTENANCE CLEANING THE WHEELS REPLACING THE BATTERY REMOVE AND CLEAN FRONT WHEEL EVERY WEEK. REPLACE FRONT WHEEL EVERY 12 MONTHS. See sharkaccessories.com for replacement parts. Pull the Front Caster Wheel from its housing and remove any debris buildup. Clean the wheel housing, then reinsert the caster wheel. To remove the battery, turn the unit over and unscrew the battery cover with a Phillips-head screwdriver. REPLACEMENT PARTS NOTE: Leverage may be required to remove the wheel.
MAINTENANCE END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE TROUBLESHOOTING IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating LLC’s (“SharkNinja”) End-User License Agreement (“EULA”) is a legal agreement between You (either a single entity or an individual) and SharkNinja for SharkNinja’s Software Applications, including those installed by You onto your SharkNinja products or alre
END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE 5.6 You will not use the Ayla Application Libraries or Ayla Embedded Software to attempt to gain unauthorized access to or use of the systems/services of SharkNinja’s other licensors; nor will You transmit viruses, worms, Trojan horses, time bombs, spyware, malware, cancelbots, passive collection mechanisms, robots, data mining software, or any other malicious or invasive code or program into the systems/services of SharkNinja’s other licensors. 5.
NOTES REGISTER YOUR PURCHASE registeryourshark.com RECORD THIS INFORMATION Model Number: ������������������������������������� Date Code: ����������������������������������������� Date of Purchase: ����������������������������������� (Keep receipt) Store of Purchase: ����������������������������������� TIP: You can find the model and serial numbers on the QR code labels on the bottom of the robot and battery.
SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents © 2019 SharkNinja Operating LLC. BOTBOUNDARY and SHARK are registered trademarks of SharkNinja Operating LLC.
