NV100 Owner’s Guide www.sharkclean.com NV100_26_IB_ENG_110317_2.
English Contents Thank you for purchasing the Shark® Navigator™ Vacuum. Important Safety Instructions 2 Getting Started 4 Assembly 4 Using the Vacuum 6 Emptying the Dust Cup Assembly 7 Proper Care of Your Vacuum 8 Troubleshooting 9 Checking for Blockages 10 Maintenance 11 Warranty and Registration 13 This manual covers model: NV100 26 TECHNICAL SPECIFICATIONS Voltage: 120V. Watts: 700W Amps: 5.83A Hertz: 60Hz TOLL FREE: 1-800-798-7398 NV100_26_IB_ENG_110317_2.indd 2-1 www.
IMPORTANT SAFETY INSTRUCTIONS English For Household Use Only WHEN USING YOUR SHARK® NAVIGATOR™ VACUUM, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® NAVIGATOR™ VACUUM. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. Do not force into the outlet or try to modify the plug to fit.
English ASSEMBLY Getting Started ot all accessories are available N on all models. e a Fig. 1 Hose Connector d Fig. 3 g c b b f h a Fig. 4 Fig. 5 Fig. 6 Fig. 2 FIRST THING’S FIRST, YOU NEED TO KNOW WHAT’S IN THE BOX YOU JUST OPENED: YOUR SHARK® NAVIGATOR™ IS EASY TO ASSEMBLE: a Handle e Hose Connector b Extension Wand f c Stretch Hose g Accessory Holder d Dust Cup h Power Nozzle Vacuum Body Optional tools are available for sale for any NV100 model.
English Emptying the Dust Cup Assembly Using the Vacuum DO NOT pull vacuum cleaner around by the hose. For suction to reach the power nozzle, the extension wand and stretch hose must be attached securely on the vacuum body. DO NOT over-extend the hose. Always hold the vacuum so that it does not tip over. The height of your power nozzle has been optimized for easy pushing and superior cleaning on all floor types.
Proper Care of Your Shark® Upright Vacuum COMPONENT WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. 2 Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. 3 Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. 4 Post-Motor Filter Clean once every 12 months under normal use.
Checking for Blockages English Maintenance Blockages may cause your vacuum to overheat and shut down. If this occurs, clear the blockages, then follow the instructions for Resetting the Motor Thermostat on page 11. Resetting the Motor Thermostat Your Shark® Navigator™ is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. I MPORTANT: Never insert sharp objects into any opening to clear an obstruction.
Notes English Euro-Pro Three-Year (3) Limited Warranty EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of three (3) years from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
Euro-Pro Operating LLC Newton, MA 02459 English: 1-800-798-7398 www.sharkclean.com Copyright © Euro-Pro Operating LLC 2011 Printed in China Illustrations may differ from actual product. NV100.26.E.110317.2. NV100_26_IB_ENG_110317_2.
