OWNER’S GUIDE LA400 www.sharkclean.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING AN ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® LIFT-AROUND™ CANISTER VAC. POLARIZED PLUG: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
Contents Thank you for purchasing the Shark® Lift-Around™ Canister Vac. Getting Started.............................................................................6 How to Use....................................................................................8 Maintenance.................................................................................10 Checking for Blockages................................................................12 Storing.........................................................
Getting Started A B C I D J NOTE: Always turn the power off before attaching or detaching accessories. E REMOVABLE TOOL CADDY (B) F K G L Bare floor NOZZLE (H) CANISTER CADDY (C) With the right cleaning tool in place and the Flexible Hose, you can extend your reach into hard-to-clean areas. Specially designed to hold the Shark LiftAround ™ and convert it to a canister vacuum.
How to Use Align arrows to attach tool caddy Hose Dock Fig. 8 Caddy Release Fig. 1 Fig. 2 Pull out to remove tool caddy Fig. 6 Power Button Fig. 4 Fig. 5 Fig. 9 Fig. 3 ASSEMBLING THE LIFT-AROUND CANISTER VAC 4 Attach the shoulder strap onto the hooks on the handle of the Canister Vac. (fig. 5) 1 Insert the end of the flexible hose into the connector on the front of the Lift-Around™ Canister Vac. (fig. 1) 5 Empty Dust Cup after cleaning and periodically during cleaning when it appears full.
Maintenance To reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks. Reassemble all parts securely before operating vacuum. CAUTION: Unplug the vacuum; failure to do so might result in electric shock. For best results empty the Dust Cup after each use; empty several times during prolonged usage or when it reaches the MAX fill line. COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum.
Storing Checking for Blockages Resetting the Motor Thermostat Locking Latch Your Shark® Lift-Around™ Canister Vac is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. To reset the Motor Thermostat: Press the Power Button to turn the vacuum off. Unplug the vacuum. Check for clogged hose or filter; unclog hose and replace filter. Refer to Checking for Blockages. Wait 45 minutes for vacuum to cool; then plug in the vacuum.
Troubleshooting Guide PROBLEM Vacuum is not picking up dirt. POSSIBLE REASONS & SOLUTIONS EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of three (3) years from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. Check Filters to see if they need cleaning. Follow instructions for rinsing and drying the Filters before re-inserting back into the Vacuum.
Euro-Pro Operating LLC USA: Newton, MA 02459 CAN: 4400 Bois Franc, St-Laurent, QC H4S 1A7 English: 1-800-798-7398 www.sharkclean.com COPYRIGHT© EURO-PRO OPERATING LLC 2012 PRINTED IN CHINA Illustrations may differ from actual product. LA400.E.120821.