User Guide
sharkclean.com sharkclean.com
VERSATILE CLEANING
Press the Power button, then choose your Surface
setting and your Suction setting. Place your foot
gently on the floor nozzle and tilt the handle back.
FLOOR
NOTE: Brushroll will only engage when the handle is
tilted back.
Press the Wand Release button to disconnect
the handheld vacuum. Attach accessory, then press
the power button.
Stand the vacuum upright. Step on the Floor Nozzle
Release pedal and pull the wand up to disconnect it
from the floor nozzle. Attach accessory, then press
the power button.
ABOVE FLOOR
NOTE: All accessories attach to either the handheld
vacuum or the wand.
Wand
Release
Disconnect the hand vacuum from the wand.
Press the dust cup Empty button.
EMPTYING THE DUSTCUP
MAINTAINING YOUR VACUUM
Wand
Release
1
2
Remove cover and frame. Slide filter o frame.
Rinse with water. Air-dry completely for at least
24 hours before reinserting. Tap o loose dirt
between washes as needed.
Remove cover and filter. Rinse filter with water.
Air-dry completely for at least 24 hours before
reinserting. Tap o loose dirt between washes
as needed.
PRE-MOTOR
FILTER
PRE-MOTOR FILTER POST-MOTOR FILTER
POST-MOTOR
FILTER
FILTER
FRAME
FILTER COVER
FILTER
COVER
CLEANING THE FILTERS
To clean filters, rinse with water only to prevent damage from cleaning chemicals. Allow all filters to air-dry for
at least 24 hours before replacing them in the vacuum to prevent liquid from being drawn into electricparts.
IMPORTANT: DO NOT use soap when cleaning the filters.