Operator`s manual

OPERATOR’S MANUAL
PRESSURE WASHER
9.801-262.0 • Shark CB • Rev. 01/12
25
PRESSURE WASHER
OPERATOR’S MANUAL
OPERATOR’S MANUAL
PRESSURE WASHER
ITEM PART NO. DESCRIPTION QTY
1 8.751-216.0 Crankcase 1
2* See Kits Below Plunger Oil Seal 3
3* See Kits Below O-Ring Ø1.78 x 31.47 3
4* See Kits Below Pressure Ring 3
5* See Kits Below U-Seal 3
6* See Kits Below Intermediate Ring 3
7* See Kits Below U-Seal 3
8 9.803-199.0 Washer, Copper 1
9 9.802-926.0 Plug, Brass 1/2 1
10 8.751-218.0 Manifold Head 1
11* See Kits Below O-Ring Ø2.62 x 17.13 6
12* See Kits Below Valve Assembly 6
13* See Kits Below O-Ring Ø2.62 x 20.29 6
14 9.802-928.0 Valve Plug 6
15 9.802-938.0 Manifold Stud Bolt 8
16 9.802-884.0 Washer 16
17 9.803-198.0 Copper Washer 3/8 1
18 9.802-925.0 Brass Plug 3/8 1
ITEM PART NO. DESCRIPTION QTY
23 9.802-944.0 Screw, Hex, 8mm x18mm 8
24 8.717-210.0 Closed Bearing Housing 1
25 9.803-192.0 O-Ring Ø1.78 x 60.05 2
26 8.933-011.0 Tapered Roller Bearing 2
27 8.751-222.0 Crankshaft (5030,3540) 1
8.751-223.0 Crankshaft ( 4030, 4035) 1
28 9.803-167.0 Crankshaft Key 1
29 9.802-921.0 Oil Dip Stick 1
30 9.803-140.0 Crankshaft Seal 1
31 9.803-178.0 Shim 2
32 8.717-209.0 Bearing Housing 1
33* See Kits Below Plunger Nut, M8 3
34* See Kits Below Copper Spacer 3
35* See Kits Below Plunger (4035) 3
See Kits Below Plunger (4030, 5030) 3
See Kits Below Plunger (3540) 3
TORQUE
SPECS
Item # Ft.-lbs
14 75
15 30
23 8
33 9
43 13
48 7.6
8.751-186.0 KM3540R.3
8.751-187.0 KM4030R.3
8.751-188.0 KM4030L.3
8.751-189.0 KM4035R.3
8.751-190.0 KM4035L.3
8.751-191.0 KM5030R.3
8.751-192.0 KM5030L.3
KM.3 SERIES PUMP EXPLODED VIEW
KM.3 SERIES PUMP EXPLODED VIEW PARTS LIST