Specifications

8
CB SERIES PRESSURE WASHER OPERATORS MANUAL
Shark CB Rev. 6/02
WARNING
SOME DETERGENTS
MAY BE HARMFUL IF
INHALED OR
INGESTED
HOW TO USE
THE DETERGENT INJECTOR
WARNING: Some detergents may
be harmful if inhaled or ingested
causing severe nausea, fainting or
poisoning. The harmful elements
may cause property damage or
severe injury.
The machine can siphon and mix
detergents with the use of Shark's
detergent injector kit.
1. Pull injector quick coupler collar back and secure on
discharge nipple. Injector valve body arrow should
point in direction of flow.
2. Connect high pressure hose to injector nipple secur-
ing quick coupler.
3. Start machine as outlined in Operating Instructions.
4. Place detergent pickup tube into container of deter-
gent solution.
5. Install the brass soap nozzle provided with the injec-
tor into the quick coupler of the wand.
6. Open spray gun. Water detergent ratio is approxi-
mately 15 to 1.
7. When you finish washing, rinse by simply releasing
the spray gun, removing the soap nozzle, and re-
placing the pressure nozzle back into quick coupler.
NOTE: The detergent injector will not siphon with
the high pressure nozzle at the end of the wand.
8. If your machine has a variable pressure wand, turn
the pressure control handle counterclockwise to lower
the pressure. This directs the water flow through the
soap nozzle, allowing the detergent injector to si-
phon soap. To rinse with high pressure water, simply
turn the control handle clockwise.
9. For clean up, place detergent pickup tube into con-
tainer of clear water and follow steps 5 and 8 to pre-
vent detergent deposits from damaging the injector.
Quick Coupler
Soap Nozzle
Wand
High Pressure
Nozzle
Discharge
Nipple
Detergent Injector
Quick Coupler
Trigger
Detergent
Pickup Tube
Spray
Gun
High Pressure
Hose
On/Off
Switch
Garden
Hose Inlet
Wand Grip