Specifications

29
Floor Care Hot Water PWTrailersJettersAccessoriesRestorationWater TreatmentWash Pads Cold Water PW
ACCESSORIES | ATTACHMENTS TO ENHANCE CLEANING EFFECTIVENESS
Shark Pressure Washers - a member of KÄRCHER North America Tel: [phone] Fax: [phone] Email: [e-mail]
2015 SHARK PRICE LIST
RELIABLE RUGGEDNESS
AND SAFETY
Vacuum hose not included
Order No. Description PSI List Price
8.749-911.0 Surface Cleaner - 12” 4000 $861.00
8.712-284.0 Turbo Cleaner - 8" 4000 $661.00
8.712-280.0 Duct Cleaner TYR-2s, Adjustable 6" 4000 $636.00
8.712-279.0 Duct Cleaner TYR-2s, Fixed 6" 4000 $574.00
Mosmatic Roof Cleaner
• 21-inch
• 4000 PSI
• 250
º
F
• 31.9 lbs.
• Pressure gauge
• Ball valve
• Adjustable Wheels (height & width)
• Safety eye connection for rope or cable
• (2) 1/8" nozzles sold separately
Industrial quality tool specially designed for efficient, high
pressure roof cleaning while keeping the operator in a safe
area.
• 250°F
• 4000 PSI
• 2lbs
• Inlet Ports:
3/8" NPTF
Mosmatic
Surface Cleaners & Duct Cleaner
Duct Cleaner
Designed as an accessory for use with high pressure
pumps or pressure washers. Cleans Ducts, Chutes,
Vents, Restaurant Exhausts, Tanks, etc.
Self rotating and feeding stainless steel triple bear-
ing system for constant easy turning. Nozzle holders
are 1/8" NPTF. Nozzles are sold separate.
12" Surface Cleaner
Designed for effortless cleaning of small areas
including walls and angled surfaces.
High RPM swivel with integrated toggle joint and
adjustable tension system.
Turbo Surface Cleaner
Delivers high-pressure performance with low maintenance for any hot or cold pres-
sure washer. Completely stainless steel design makes this the toughest surface
cleaner available in the pressure cleaning market.
Swiss engineered with high RPM Swivel features
reinforced self-lubricated stainless steel ball bear-
ings and dual spring based carbide seal bushings
for long-lasting operation under tuff conditions.
Ideal for Pressure Washer Contractor to clean
Walls, Ceilings, Public Facilities, Tile Floors and
other hard to reach areas. Uses 1/8" meg 1503
nozzles.
• 250°F
• 4000 PSI
• 6.5lbs
• 250°F
• 4000 PSI
• 9lbs
• 12" SS Cover
NEW!
• 250°F
• 5000 PSI
• 21” cleaning width
• Stainless steel guard with
adjustable housing
• 4 stainless steel castors for easy
maneuvering in tight spaces
• Withstands up to 5000 PSI
• Gum remover nozzle*
*Sold separately for model FL-AHB-KAU
520 only
Mosmatic With Recovery -
Recover water & dirt while cleaning
These surface cleaners are based off the Mosmatic 12” surface clean-
ing, with an added recovery system. The specially designed recovery system will
allow you to recover the water and dirt from your cleaning area in one pass.
Model FL-AHB-KAU comes with a Gum Remover Scraper, and also has an optional Gum
Remover Nozzle (sold separately). The special gum remover nozzle is mounted on the
back of the cleaner. The right hand gun is for the surface cleaner and the left hand gun
is for the gum remover, or other tough spots. The flat angle of the nozzle lifts and breaks
up the gum for easy removal.
Order No. Model Description PSI List Price
8.751-299.0 FL-AH 520 Surface Cleaner w/ Recovery 5000 $3044.00
8.751-300.0 FL-AHB-KAU 520 Gum Remover w/ Recovery 5000 $4162.00
8.751-301.0 Gum Remover Nozzle* 5000 $752.00
*Sold separately, for 8.751-300.0
Order No. Description List Price
8.749-910.0 Mosmatic Roof Cleaner $2470.00