Specifications

BG SERIES PRESSURE WASHER OPERATOR’S MANUAL
7
Shark BG • 97-6125 • Rev. 11/03
COMPONENT IDENTIFICATION
Pump — Develops high pressure.
Starter Grip — Used for starting the engine manually.
Spray Gun — Controls the application of water and de-
tergent onto cleaning surface with trigger device. Includes
safety latch.
Detergent Injector — Allows you to siphon and mix
detergents.
High Pressure Hose — Connect one end to water pump
discharge nipple and the other end to spray gun.
Pump Protector — Cycles water through pump when
water reaches 140°F.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm water
will discharge from pump onto floor. This system
prevents internal pump damage.
Spray
Gun
High Pressure
Hose
Wand w/Side
Grip
Trigger
Water
Supply Hose
(not included)
Wand
Coupler
Detergent
Filter
Pressure Nozzle
Soap Nozzle
Soap
Nozzle
High
Pressure
Nozzles
Unloader
Pump
ON-OFF
Switch
Starter
Grip
Detergent
Bucket
(not included)
Detergent
Hose
Inlet
Connector
Detergent
Injector
Quick Coupler