Instruction Manual

9sharkclean.co.uk8 sharkclean.co.uk
ASSEMBLY
1. Place motorised Floorhead on floor and insert Wand, pressing it in until it clicks
securely into place.
2. Place Pod onto wand and slide down to connect.
3. Insert Handle into wand, pressing it in until it clicks securely into place.
4. Connect Hose to back of pod, pressing it in until it clicks securely into place.
5. Store included accessories on the Accessory Posts on the pod.
6. Remove Anti-Odour Technology Dial from aluminum can. Flip up the handle, align the teal
arrows, then insert the Anti-Odour Technology Diall into the floorhead.
7. To lock and engage the Anti-Odour Technology Dial, rotate it anticlockwise until it clicks into
the desired odour intensity setting.
More detailed odour assembly instructions and visuals on the following two pages.
IMPORTANT: For proper operation, ensure all connections are securely clicked into place.
ASSEMBLY
(Click)
1
(Click)
2
(Click)
3
(Click)
4
POWER CORD
For cord access, rotate upper hook down
and remove cord.
UPPER CORD HOOK
5
(Turn to
Click)
7
6